Suppliers offering marine Loading/discharging systems for lpg/lng in gaseous phase


	355 - Loading/discharging systems for lpg/lng in gaseous phase

Show map

Supplier name

Air Products AS

NORWAY

Product name	Product description
PURIFICATION SYSTEMS	Air Products PRISM® membranes effectively separates hydrogen from carbon monoxide, nitrogen, argon, methane, and heavier hydrocarbon vapors.

Alfa Laval Nordic AS

NORWAY

Product name

Product description

GAS CLEANING

GAS CLEANING PureVent PureVent is a compact separator patented by Alfa Laval and developed in cooperation with Wärtsilä. By using centrifugal separation to remove oil and particles from crankcase gas, it offers an opportunity to further reduce engine emissions. Crankcase gas enters at the bottom of the separator and passes into the disc stack, where centrifugal force presses the oil and soot out between the discs. The virtually oil-free air can then be released into the atmosphere, while the oil that collects on the inside of the PureVent housing is recirculated as lubrication or drained off for incineration or deposit. - Suitable for crankcase gas and other oily mist emissions - 98 – 99.9% separation efficiency at 40 –150 m3/h - Provides stable pressure in the engine crankcase, whereas filters can clog and change the pressure drop - Only 30 l in size - Major service every 16 000 hours or five years, whichever comes first

Click to view product documents


Marine essentials Equipment and services for marine applications	pdf
Alfa Laval Product Brochure 2012	pdf

GAS CONDENSATION

GAS CONDENSATION Welded plate heat exchangers, AlfaRex Lightweight and up to 80 % smaller than traditional shell-and-tube heat exchangers, gasket-free AlfaRex plate heat exchangers are suitable for duties involving high temperatures, high pressures and aggressive media. AlfaRex models are laser-welded in only two dimensions, which allows them to resist fatigue by contracting and expanding freely along their length. Their close temperature approach creates lower operating costs and significant life cycle savings by minimizing power consumption in condensation duties, where less compression of boil-off gas is needed. *Temperature range from -50°C to +350°C and pressure capabilities up to 40 bar g *Compatibility with liquids, gases and mixtures of liquids and gases (two-phase flows) *Low hold-up volume *Laser welding that reduces the heat-affected zone and stress build-up in the plates Applications: *LPG condensation *Evaporation/ condensation of clean fluids *Refrigeration *Cargo heating liquid *General heating/cooling with high pressures or temperatures

Click to view product documents


Marine essentials Equipment and services for marine applications	pdf
Alfa Laval Product Brochure 2012	pdf

Besiktas Marine Expert Ship Supply & Repair Service

TURKEY

Product name	Product description
GAS DETECTORS	DEDECTORS AND MEASUREMENTS INSTRUMENTS Our wide range of products offering reliance and safety to various fields are introduced, and each model can be searched from the Category, Target Gas or Product Search. We are provider of rotation management systems and calibration instruments to the shipping industry.

Bro & Associates a.s., K.

NORWAY

Product name	Product description
GAS POWER

Presserv AS

NORWAY

Product name

Product description

DEHUMIDIFICATION

For most materials the relative humidity (RH) is essential for degradation. Rust normally does not occur if the RH is below 50%. This means that machines, structures and especially electrical and electronic equipment have longer life and lower maintenance costs. Dehumidifiers are ideal for drying, preservation and long-term protection of steel surfaces in confined areas. In closed steel structures may be used as an alternative to traditional coatings.

Sperre Air Power AS

NORWAY

Product name

Product description

AIR RECEIVERS

30-3000 Sperre supplies air receivers according to standard drawings, in sizes from 30 to 3000 litres. The working pressure ranges from 7 to 30 bar. All standard tanks are supplied in both horizontal and vertical configurations

Customized Solutions Customized solutions according to customer specifications. We build and deliver the equipment as specified, complete with piping, tanks and electrical systems – tested, classified and ready for plug-in installation. Sperre has supplied special high-pressure tanks to seismic ships and offshore installations, where the working pressure has been up to 300 bar.

Wärtsilä (Hamworthy) Moss AS

NORWAY

Product name	Product description
BALLAST WATER MANAGEMENT

355 - Loading/discharging systems for lpg/lng in gaseous phase