Marine suppliers offering marine Air and gas treatment (dehydrators, air separators)


	Air and gas treatment (dehydrators, air separators)

Information

Suppliers

Documents

Sales representatives

	Air drying and water treatment
	www.ag.no

Search for products in this list:
			Show map

Supplier name

Alfa Laval Nordic AS

NORWAY

Product name

Product description

GAS CLEANING

GAS CLEANING PureVent PureVent is a compact separator patented by Alfa Laval and developed in cooperation with Wärtsilä. By using centrifugal separation to remove oil and particles from crankcase gas, it offers an opportunity to further reduce engine emissions. Crankcase gas enters at the bottom of the separator and passes into the disc stack, where centrifugal force presses the oil and soot out between the discs. The virtually oil-free air can then be released into the atmosphere, while the oil that collects on the inside of the PureVent housing is recirculated as lubrication or drained off for incineration or deposit. - Suitable for crankcase gas and other oily mist emissions - 98 – 99.9% separation efficiency at 40 –150 m3/h - Provides stable pressure in the engine crankcase, whereas filters can clog and change the pressure drop - Only 30 l in size - Major service every 16 000 hours or five years, whichever comes first

Click to view product documents


Marine essentials Equipment and services for marine applications	pdf
Alfa Laval Product Brochure 2012	pdf

GAS CONDENSATION

GAS CONDENSATION Welded plate heat exchangers, AlfaRex Lightweight and up to 80 % smaller than traditional shell-and-tube heat exchangers, gasket-free AlfaRex plate heat exchangers are suitable for duties involving high temperatures, high pressures and aggressive media. AlfaRex models are laser-welded in only two dimensions, which allows them to resist fatigue by contracting and expanding freely along their length. Their close temperature approach creates lower operating costs and significant life cycle savings by minimizing power consumption in condensation duties, where less compression of boil-off gas is needed. *Temperature range from -50°C to +350°C and pressure capabilities up to 40 bar g *Compatibility with liquids, gases and mixtures of liquids and gases (two-phase flows) *Low hold-up volume *Laser welding that reduces the heat-affected zone and stress build-up in the plates Applications: *LPG condensation *Evaporation/ condensation of clean fluids *Refrigeration *Cargo heating liquid *General heating/cooling with high pressures or temperatures

Click to view product documents


Marine essentials Equipment and services for marine applications	pdf
Alfa Laval Product Brochure 2012	pdf

Alfsen og Gunderson AS

NORWAY

Product name

Product description

DEHUMIDIFIERS

High relative humidity increases the risk of corrosion, mildew, rot and problems in electronics. Humidity reduction and control has proved to be the best and most cost efficient remedy against such damage.Alfsen og Gunderson AS has since 1965 presented leading solutions based on dry air technology and humidity control.

- Tank drying equipment for chemical tankers. - Cargo hold dehumidifiers - AG Air Dryer for blasting and planting. - Dehumidifiers for protecting against condensation and corrosion damages. Inert gas dryers. ATEX Dehumidifiers, Zone 1 and 2

Click to view product documents


Better Dry than Sorry	pdf
AG Offshore	pdf

Atlas Copco Compressor Technique Scandinavia

NORWAY

Product name	Product description
DEHYDRATORS

Besiktas Marine Expert Ship Supply & Repair Service

TURKEY

Product name	Product description
GAS DETECTORS	DEDECTORS AND MEASUREMENTS INSTRUMENTS Our wide range of products offering reliance and safety to various fields are introduced, and each model can be searched from the Category, Target Gas or Product Search. We are provider of rotation management systems and calibration instruments to the shipping industry.

Bro & Associates a.s., K.

NORWAY

Product name	Product description
GAS POWER

F-Tech AS

NORWAY

Product name

Product description

DEHUMIDIFICATION

An adsorption dehumidifier is built up from the main components of the adsorption rotor, the drive motor / gear for rotor operation, the heating coil for the regeneration of the rotor, fans and electrical components.   These elements are assembled in a cabinet and are delivered as a ready-to-use unit. Just plug in the power and the channels, and the system is ready for use.   Look in the item group structure to the left of our various systems.

STEEM HUMIDIFIERS

Steam humidifiers for ships and offshore installations   Improved cabinet on humidifiers! Now the humidifiers HyLine and Ministeam are delivered in stainless steel.

Dry air inside is a challenge in office buildings, aboard ships and oil platforms, in hotels and everywhere else we stay for long periods. Proper humidity is important for a good working and indoor environment.   Our marine humidifiers are specially built to prevent power leaks. They also have simple programming to suit different water qualities.

Presserv AS

NORWAY

Product name

Product description

DEHUMIDIFICATION

For most materials the relative humidity (RH) is essential for degradation. Rust normally does not occur if the RH is below 50%. This means that machines, structures and especially electrical and electronic equipment have longer life and lower maintenance costs. Dehumidifiers are ideal for drying, preservation and long-term protection of steel surfaces in confined areas. In closed steel structures may be used as an alternative to traditional coatings.

Spirax Sarco AS (Norge)

NORWAY

Product name	Product description
HUMIDIFIERS