Heat exchangers & steam generation
Information
Suppliers
Documents
Specialist in water treatment and environmental protection systems
Jowa Norge
www.jowa.no
Galley and Laundry Equipment !
www.edco.no
More than sensors + automation
www.jumo.no
STEAM AND HEAT SOLUTIONS
www.parat.no
STEAM AND HEAT SOLUTIONS
www.parat.no
STEAM AND HEAT SOLUTIONS
www.parat.no
STEAM AND HEAT SOLUTIONS
www.parat.no
Search for products in this list:
Show map
Supplier name
AB&Co - TT Boilers A/S
DENMARK
Product name
Product description
STEAM GENERATORS
AB&CO manufacture a wide range of customised steam boilers especially for demanding operations, where reliability and long term costs are the key words - and not just the lowest purchase price. The range includes special design such as boilers for ULTRA-HIGH STEAM PRESSURE - and in stainless steel as CLEAN STEAM boilers.
Alfa Laval Copenhagen A/S
DENMARK
Product name
Product description
HEAT EXCHANGERS
Alfa Laval Nordic AS
NORWAY
Product name
Product description
STEAM CONDENSING
STEAM CONDENSING Gasketed plate heat exchangers, TS-M and AlfaCond series Gasketed plate heat exchangers (PHEs) from Alfa Laval’s TS-M and AlfaCond series are specially engineered for steam heating and condensing applications. With their unique plate geometry, strong plate design and heat-resistant gaskets, they withstand the demands of both temperature and pressure. Moreover, their effective heat transfer allows for a reduction in cooling flow rate, which means a lower pump investment and reduced energy cost. They even create a major space savings, since their design is far more compact than the shell-and-tube models previously used in these applications. *Reduced operating costs *Ease of maintenance and shorter downtime *High turbulence, little fouling *Efficient sub-cooling *Small footprint *Extendable design for easy capacity increases *Stainless steel and titanium models available
Click to view product documents
Marine essentials
Equipment and services for marine applications
pdf
Alfa Laval Product Brochure 2012
pdf
STEAM HEATING
STEAM HEATING Our Aalborg boilers and thermal fluid systems have a long history yet remain at the cutting edge. Modular constructions and many options enable the perfect heating solution for any vessel. - Stearn and hot water production - Steam production - Combustion - Boiler/burner system control - Burner modification - Thermal fluid heating - Thermal fluid system control
Click to view product documents
Marine essentials
Equipment and services for marine applications
pdf
Alfa Laval Product Brochure 2012
pdf
WASTE HEAT RECOVERY
WASTE HEAT RECOVERY Our Aalborg solutions for recovering waste heat let you benefit from the surplus heat energy that already exists on board – in your main engine exhaust, and in other sources as well. - Exhaust gas heat recovery - Superheating
Click to view product documents
Alfa Laval Product Brochure 2012
pdf
Marine essentials
Equipment and services for marine applications
pdf
WATER HEATING
WATER HEATING Hot Water Loop A complement to freshwater generator systems, the Hot Water Loop provides the correct amount of heating water at the correct temperature – even when the engine is not running. This facilitates the distillation process and makes maximum use of the freshwater generator’s capabilities. Reliable and automatic, the Hot Water Loop can even be used for other onboard heating applications, such as the pre-heating of the main engine during periods of standstill. Its compact, modular design requires little space and ensures a simple, low-cost installation. *Reliable operation due to self-adjusting steam regulation equipment *Possibility to use in pre-heating the main engine or other equipment *Capacity: 7–100 m3/24 h Equipment: *Stainless steel plate heat exchanger with bed frame and internal piping *Hot water circulating pump, electric motor and starter *Thermostatically controlled steam/thermal oil regulating valve *Instruments and steam trap
Click to view product documents
Marine essentials
Equipment and services for marine applications
pdf
Alfa Laval Product Brochure 2012
pdf
Calesco Foil
SWEDEN
Product name
Product description
HEATING ELEMENTS
Dahl AS, Brødrene
NORWAY
Product name
Product description
WATER HEATERS
Heating products and systems Brødrene Dahl is a leading supplier of heating products and systems to the Norwegian market. We can deliver everything you need for a complete heating system, and have several heating experts who can help you dimension and choose the right solution. We can deliver everything you need for a complete heating system, and have several heating experts who can help you dimension and choose the right solution. Innovation and further development We constantly develop product concepts that contain complete product packages for heating water and homes. Brødrene Dahl focuses on systems where we combine new power sources with tried and tested components. Solar collectors in combination with heat pumps is an example of a product package developed by our heating experts.
Danfoss AB, OY
FINLAND
Product name
Product description
OIL HEATING CONTROL, AUTOMATIC
Edco Marine AS
NORWAY
Product name
Product description
WATER HEATERS
EDCO/OSO Marine Waterheater For heating cold tap water, as well as storing hot tap water onboard ships and off-shore installations. Delivered for the following heating: •Electrical •Hotwater from boiler •Steam •Thermaoil
Ekström & Son AB
SWEDEN
Product name
Product description
HEAT EXCHANGERS
HELIX HEAT EXCHANGERS The HELIXCHANGER™ is a helically baffled shell and tube heat exchanger. Each baffle occupies about one quadrant of the cross section and has a certain inclination with the centerline of the exchanger. Successive baffles are arranged in such a way as to create continuous helical and near plug-flow conditions on the shell side. According to Ekström & Son’s estimations, HELIXCHANGER enables energy savings of up to 50% due to lower pressure drops and could result in less than two years of pay-back time. The design principle of the HELIXCHANGER can be utilised for new heat exchangers or when exchanging existing tube bundles, with an expected 20% increase in output capacity. The result is improved thermal effectiveness, enhanced heat transfer, reduced pressure drop, lower fouling and significantly reduced vibration hazards. SHELL & TUBE HEAT EXCHANGERS We specialise in tailor-made units that are optimised according to application and the customer's requirements. Our heat exchangers are used for the most variable applications, principally in the chemical and petrochemical industry, paper and pulp industry, and pharmaceutical industry. As we deal with a variety of applications we have to deal with many different media such as air, fresh water, salt water, steam oils and the whole spectrum of process solutions: Gas condensers, preheaters, evaporators, condensers, etc. Our projects vary but often involves creating a new design from scratch. In many cases we also replace an existing heat exchanger or carry out a retubing. We specialise in tailormade heat exchangers and look forward to hearing about your application!
PLATE HEAT EXCHANGERS
WE REPRESENT Plate Heat Exchanger – Funke Ekström&Son is a reseller of Funke’s heat exchangers in Scandinavia. Funke has a wide range of heat exchangers of high quality. Funke was founded in 1974 and focuses on the design and manufacture of plate and tube heat exchangers for virtually all industrial applications. Design and calculations are strictly tailored according to customer specific requirements and includes the process of adaptation, thermal design, calculation, stress analysis and vibration analysis. Plate and shell heat exchangers – Gesmex Ekström&Son is reseller of GESMEX heat exchangers in Scandinavia. GESMEX design and manufacture compact heat exchangers of laser-welded plate and shell for industrial applications. The company continuously invests in product development and the latest technology in order to be able to offer high efficiency heat exchangers for a long-term security in their customers’ enterprises. Heat exchangers – HRS Ekström&Son is reseller of HRS heat exchangers in Scandinavia. HRS are global specialists in heat transfers and have long experience in the design and manufacturing of heat exchangers and other components for process plants in environmental- and food industries.
Enwa Water Technology AS
NORWAY
Product name
Product description
HEATING PLANTS
Produksjon og salg av utstyr og anlegg for vannbehandling. EnwaMatic Vannbehandler for vannbåren varme- og vannbåren kjøleanlegg, sparer energi og: -filtrerer ut slam -hindrer korrosjon -reduserer vannets innhold av oksygen -forebygger bakteriell vekst Verksteder og service world wide.
Click to view product documents
EnwaMatic Maritime
pdf
Göteborgs Energy Systems AB - GESAB
SWEDEN
Product name
Product description
HEATING COILS
Thermal Oil Heating Systems have been installed in a large number of chemical tankers, ferries and cargo carriers during the last years. Thermal oil fed directly to various types of heating coils is used in most of the chemical tankers build nowadays. To maximize heating efficiency both horizontal and vertical heating coils can be used in cargo heating. The pipe materials are stainless steel or carbon steel. The GESAB Heating Coil Calculation computer based program, HCC, minimizes costs of pipe work and material.
STEAM GENERATORS
Steam generators for heating, cleaning and de-icing purposes. These are particulary requested for chemical tankers, where the cleaning requirement is an issue.
THERMAL FLUID HEATERS
GESAB - HTI Thermal Oil Heaters are built according to DIN 4754 and the classification Societies´ rules for pressure vessels. The forced circulation heaters of vertical or horizontal design are available of outputs of 200-15000kW. Thermal Oil Heaters, with at heating capacity of 800 kW and upward, can use heavy fuel oil burners (viscosity to 700 cSt at 50 C). On request, we can supply burners with a rotating cups and heaters designed for combustion of waste oil and sludge. Generated heat, by oil or gas flame will be transferred to the thermal oil system through bent pipes forming cylinders inside the heater. Within the inner cylinder - the combustion chamber - the heat is transferred by radiation and in the outer cylinder by convection.
Heat-Con Varmeteknikk AS
NORWAY
Product name
Product description
PIPE HEAT EXCHANGERS
Pipe heat exchangers A tubular heat exchanger can be designed to withstand higher pressures and temperatures than a conventional plate heat exchanger.
PLATE HEAT EXCHANGERS
Heat-Con has a wide range of gasket exchangers, brazed exchangers and plate-in-shell exchangers Heat-Con Varmeteknikk supplies packing exchangers and plate-in-shell (fully welded) exchangers from Tranter International , as well as fully soldered exchangers from SWEP International . With these suppliers, Heat-Con covers most needs when it comes to heat exchangers and heat recovery systems.
SELF-CLEANING HEAT EXCHANGERS
Therm-X self-cleaning heat exchanger Therm-X, a self-cleaning heat exchanger construction for use in connection with energy recovery or heating of fibrous / impure process liquids
Henry Marine A/S
DENMARK
Product name
Product description
HEAT EXCHANGERS
Itek AS
NORWAY
Product name
Product description
HEAT EXCHANGERS
HEAT EXCHANGERS AND PROCESS COOLING ITEK delivers heat exchangers (liquid-liquid) for process water, flue gas exchangers (up to 600°C) and industrial heat exchangers for aggressive environments. We have experience from several projects which have made use of the combination of process cooling and district heating to provide efficient utilization of heat energy from waste water. In addition to product deliveries, we also provide project management, technical calculations, 3D-scan of the facilities and engineering. Recovering the heat from waste water and use it for district heating is a win-win situation which benefits both the customer and the environment.
Jowa Norge A/S
NORWAY
Product name
Product description
WATER HEATERS
JOWA HWP/A Water heaters - hydraphore units Water-heaters are available in a variety of standard sizes from 12 to 3000 L. The HWP/A series comes ready connected with control cabinet, heating elements, valves and thermostats.
Click to view product documents
Hydrophore & Calorifier
pdf
JUMO AS
NORWAY
Product name
Product description
HEAT EXCHANGERS
Heating and cooling systems Heat exchangers are technical devices which are used to transfer thermal energy from one medium to another. Usually the heat exchangers use water, but sometimes other fluids and even solids may be utilized. Normally the function of heat exchangers is to maintain heat during ventilation or passive cooling. In addition, heat exchangers are used to recycle heat from engines and exhaust gas.
Mahadev Corporation
INDIA
Product name
Product description
HEAT EXCHANGERS
Norco A/S
NORWAY
Product name
Product description
HEAT EXCHANGERS
PLATE HEAT EXCHANGERS
Norse Water
NORWAY
Product name
Product description
STEAM BOILERS
ELEKTRISK ELEMENTKJEL Med flere tiårs erfaring innen utvikling av damp- og elkjeler, har vi produsert PHE-kjelene etter egen oppskrift. Våre egenproduserte PHE elektriske dampkjeler leveres med hetvanns- og varmtvannskjeler, kommer i alle størrelser og tilpasses hver kundes unike behov.
Norsk Atlas A.S
NORWAY
Product name
Product description
HEAT EXCHANGERS
Novenco Marine & Offshore AS
DENMARK
Product name
Product description
HEATING PLANTS
Oso Hotwater Export AS
NORWAY
Product name
Product description
WATER HEATERS
Maxi Marine Supplying the world’s shipping, cruise and offshore fleet with hydrophores and calorifiers for decades provides unique experience and know-how. Reference projects include Norwegian oil & gas platforms Troll, Oseberg, Valhall and many others, as well as some of the best-known cruise ships in the world. OSO Hotwater holds ISO 3834-2 welding certification (“Quality requirements for fusion welding of metallic materials”) for independent third-party verification. As standard, all pressure vessels are designed according to EN 13445 (“design, fabrication, and inspection of pressure vessels”) and additional certificates are available upon request. Whatever requirement our customers have, we strive to meet them. Advantages Maxi Marine Customizable stainless steel tanks from 100 – 15.000 liters Heat exchanger capacity from 10 – 250 kW for steam or boilers Electric heating from 5 – 100 kW as backup or booster Choice of paint color for the engine room Certificates available upon request ABS DNV GL BUREAU VERITAS LLOYDS REGISTRY
Parat Halvorsen A-S
NORWAY
Product name
Product description
FEEDWATERTANK / DEGASSER
Click to view product documents
Worldwide Service
pdf
PARAT IMR/IMT
Feedwatertank / Degasser
pdf
Marine Boilers
pdf
Offshore Heating Solutions
pdf
PARAR MFC
Feedwater Tank with Control Tank
pdf
HEAT RECOVERY UNITS
Click to view product documents
Worldwide Service
pdf
Offshore Heating Solutions
pdf
Marine Boilers
pdf
STEAM GENERATORS
Click to view product documents
Worldwide Service
pdf
Offshore Heating Solutions
pdf
Marine Boilers
pdf
THERMAL OIL HEATERS
Click to view product documents
Marine Boilers
pdf
Worldwide Service
pdf
Offshore Heating Solutions
pdf
PG Flow Solutions AS
NORWAY
Product name
Product description
PLATE HEAT EXCHANGERS
PLATE HEAT EXCHANGERS
PHE Gasketed Plate Design By means of technological innovation SONDEX has developed and designed a new generation of plate heat exchangers.
Qvale & Partners AS, Ulrik
NORWAY
Product name
Product description
HEAT EXCHANGERS
PLATE HEAT EXCHANGERS
RS Components AS
NORWAY
Product name
Product description
HEATING ELEMENTS
-Air Conditioning Equipment -Hand Dryers -Heating Controllers -Humidity Sensors -Space Heaters -Ventilation Equipment -Water Heating Se eget e-handelsystem med handlekurv på firmaets web-adresse. Egen produkt- katalog i papir- og cd-format sendes på bestilling.
Scan Tech AS
NORWAY
Product name
Product description
STEAM GENERATORS
High pressure water steamers. Steamgenerators. Rental Equipment Our rental-department offers machines and equipment for use by the majority of disciplines for on- and offshore. We can also offer highly qualified workshop personnel for service and maintenance of offshore-equipment. Service and operation We can offer highly qualified workshop personnel for service and maintenance of offshore-equipment. We have our own workshop where we carry out full service of offshore-equipment. Design & Production With our own engineering and Ex department, we can offer complete custom-built solutions.
Siljan Allards AB
SWEDEN
Product name
Product description
HEAT EXCHANGERS
Tubvärmeväxlaren Tubvärmeväxlaren är en av de viktigaste komponenterna i en processanläggning,vare sig det gäller kemi-, cellulosa– och pappers–, stål– eller processindustrini övrigt; Samma förhållanden gäller naturligtvis i värmeverk. Tubvärmeväxlaren är en ”arbetshäst” i dessa anläggningar, har en robust konstruktionoch en pålitlig funktion. Tubvärmeväxlaren är det bästa valet vid höga temperaturer och tryck ochoch lämpar sig såväl för vätska/vätska-applikationer som för förångning ochkondensering.
Spirax Sarco AS (Norge)
NORWAY
Product name
Product description
HEAT EXCHANGERS
Shell and plate heat exchangers: PSHE (Plate and Shell Heat Exchangers) Manufacturer of a wide range of fully welded (no gaskets) plate heat exchangers (Plate and Shell). Pressures up to 120 bar. Temperatures up to 400 oC (standard, higher on request). Up to 100 MW. Maximum heating surface per unit 1.800 m3. Supplied in 6 different sizes. Very compact with low weight. Wide range of materials in shell and plate. PRHE (Plate and Ring Heat Exchangers): For heating and cooling of gases, Condensers, Flue Gas Coolers & Condensers. Very compact units compared to traditional constructions. Steam/Steam Generators, Hot Oil/Steam Generators, Clean Steam Generators Shell and Tube Heat Exchangers: Stainless steel Heat Exchangers Plate and Frame Heat Exchangers: Gasketed Heat Exchangers. Special constructions for use on Steam Systems.
Thermal Tec AS
NORWAY
Product name
Product description
STEAM GENERATORS
Clayton Steam Generators The Clayton Steam generator has been continually developed since 1930 and is very different from the traditional firetube boiler design that is the familiar steam train boiler image of the past. In a firetube boiler a large amount of water and steel is heated to produce steam. In the Clayton Steam generator a small amount of water and steel is heated to produce steam. The basic design concept results in a steam making machine with staggering advantages for today’s world. The Clayton Steam generator is the best steam boiler available for all steam applications and is the preferred choice of professional thermodynamic engineers as well as many of the world’s forward looking companies and institutions who use steam in their production or processes.
Vilberg A/S
NORWAY
Product name
Product description
HEAT EXCHANGERS
Heat exchangers...
Sign in
Read more
Select language:
Arabic
Bulgarian
Catalan
Chinese_Simplified
Chinese_Traditional
Czech
Danish
Dutch
English
Estonian
Persian_Farsi
Finnish
French
German
Greek
Haitian_Creole
Hebrew
Hindi
Hungarian
Indonesian
Italian
Japanese
Korean
Latvian
Lithuanian
Hmong_Daw
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Slovenian
Spanish
Swedish
Thai
Turkish
Ukrainian
Vietnamese
0 item(s) in cart