Marine suppliers offering marine Gaskets, packings, liners & sealings


	Gaskets, packings, liners & sealings

Information

Suppliers

Documents


Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

Industrigummi. .	www.oo.no

	www.ros.no

	www.ros.no
	Keeping the world turning
	www.klueber.com

Search for products in this list:
			Show map

Supplier name

Alveberg A/S, Jak. J.

NORWAY

Product name

Product description

SEALANTS

Jak. J. Alveberg offers a range of sealants and membranes to the building and construction sector. The best known is perhaps our Polyurethane sealant "Vulkem 116" which is kind look ernes favorite when there are strict requirements for quality under difficult conditions.

Vulkem 116 is in addition to being kind ernes favorite look too great for many other joint work at the construction site: The booklets on most surfaces without primer, can be painted and can withstand constant immersion in water. Vulkem 116 meets or exceeds all relevant industry standards for sealants in terms of adhesion, flexibility and durability.

Brammer AS

NORWAY

Product name	Product description
SEALS

Bull Industri- og Skipsteknisk AS

NORWAY

Product name

Product description

SEALS

BULL Knossos® tetningskonsept går tilbake til 1988.

Ved målrettet forsknings- og utviklingsarbeid har vi skritt for skritt kunnet ta hånd om lekkasjeproblemer av høyst forskjellig art.

Vårt Knossos® design baserer vi på utstrakt nyttiggjøring av de erfaringer og den kunnskap vi etter hvert har skaffet oss.

Tester i skala 1 : 1 utføres i vår egen testrigg som står hos SINTEF i Trondheim

Carlsson & Co., Axel H.

SWEDEN

Product name	Product description
MECHANICAL SEALS

Cavotec Norge AS

NORWAY

Product name	Product description
TRAILING RINGS

Cedervall & Söner AB

SWEDEN

Product name

Product description

SEALS

Aft stern-tube seals The Cedervall aft stern-tube seals are available in two main versions, the new “SeaQual” type and the “K” type. SeaQual is available in a standard version, with essential parts made split and a retrofit version, with all parts made split. The K type is available in a split version, type KR, and a non-split version, type KLR. - SeaQual - aft oil lubricated split stern tube seal. With built in preasure equalizer and  “free-floating” alignment ring. Available for shaft diameters 205-1200 mm. - KR - aft oil lubricated split stern tube seal. With "free-floating" alignment ring. Available for shaft diameters 98-1064 mm. - KLR - aft oil lubricated non-split stern tube seal. With "free-floating" alignment ring. Available for shaft diameters 98-1064 mm.

Forward ster-tube seals The Cedervall forward oil lubricated stern-tube seals are available in two main versions, the new “SeaQual” type and the “M” type. SeaQual is available in a standard version, with all essential parts made split and a retrofit version, with all parts made split. The M type is available in a semi-split version, type MLX, and a non- split version, type MDL. A fully split inboard water lubricated seal, type  CREW, is also available. - SeaQual - forward oil lubricated split stern tube seal. With built in preasure equalizer and "free-floating" alignment ring. Available for shaft diameters 205-1200 mm.  - MLX - forward oil lubricated semi-split stern lube seal. With "free-floating" alignment ring.  Available for shaft diameters 92-1029 mm. - MDL - forward oil lubricated non-split stern tube seal. With "free-floating" alignment ring. Available for shaft diameters 66-1029 mm. - CREW - inboard water lubricated split stern tube seal. With "free-floating" alignment ring. Available for shaft diameters 186-611 mm.

Click to view product documents


Forward stern-tube seal type CREW	pdf
Aft stern-tube seal type SeaQual	pdf
Aft stern-tube seal type KLR	pdf
Forward stern-tube seal type MLX	pdf
Aft stern-tube seal type KR	pdf
Forward stern-tube seal type MDL	pdf
Forward stern-tube seal type SeaQual	pdf

SHAFT SEALS

Aft stern-tube seals The Cedervall aft stern-tube seals are available in two main versions, the new “SeaQual” type and the “K” type. SeaQual is available in a standard version, with essential parts made split and a retrofit version, with all parts made split. The K type is available in a split version, type KR, and a non-split version, type KLR. - SeaQual - aft oil lubricated split stern tube seal. With built in preasure equalizer and  “free-floating” alignment ring. Available for shaft diameters 205-1200 mm. - KR - aft oil lubricated split stern tube seal. With "free-floating" alignment ring. Available for shaft diameters 98-1064 mm. - KLR - aft oil lubricated non-split stern tube seal. With "free-floating" alignment ring. Available for shaft diameters 98-1064 mm.

Forward ster-tube seals The Cedervall forward oil lubricated stern-tube seals are available in two main versions, the new “SeaQual” type and the “M” type. SeaQual is available in a standard version, with all essential parts made split and a retrofit version, with all parts made split. The M type is available in a semi-split version, type MLX, and a non- split version, type MDL. A fully split inboard water lubricated seal, type  CREW, is also available. - SeaQual - forward oil lubricated split stern tube seal. With built in preasure equalizer and "free-floating" alignment ring. Available for shaft diameters 205-1200 mm.  - MLX - forward oil lubricated semi-split stern lube seal. With "free-floating" alignment ring.  Available for shaft diameters 92-1029 mm. - MDL - forward oil lubricated non-split stern tube seal. With "free-floating" alignment ring. Available for shaft diameters 66-1029 mm. - CREW - inboard water lubricated split stern tube seal. With "free-floating" alignment ring. Available for shaft diameters 186-611 mm.

Click to view product documents


Forward stern-tube seal type SeaQual	pdf
Aft stern-tube seal type KLR	pdf
Forward stern-tube seal type MLX	pdf
Aft stern-tube seal type KR	pdf
Forward stern-tube seal type CREW	pdf
Forward stern-tube seal type MDL	pdf
Aft stern-tube seal type SeaQual	pdf

Daros Piston Rings AB

SWEDEN

Product name	Product description
PISTON RINGS

DMI Scandinavia AS

NORWAY

Product name	Product description
CYLINDER COVERS	DMI Global’s roots lie in servicing the marine sector and developing technologies for marine applications. We have a worldwide network of reconditioning stations for large bore ship engine components and hold a stock of exchange piston crowns, cylinder covers, exhaust valves and seats at strategic locations including Europe, Dubai, Singapore, São Paulo and three Chinese locations.
CYLINDER LINERS	DMI Global’s roots lie in servicing the marine sector and developing technologies for marine applications. We have a worldwide network of reconditioning stations for large bore ship engine components and hold a stock of exchange piston crowns, cylinder covers, exhaust valves and seats at strategic locations including Europe, Dubai, Singapore, São Paulo and three Chinese locations.
PISTON RINGS	DMI Global’s roots lie in servicing the marine sector and developing technologies for marine applications. We have a worldwide network of reconditioning stations for large bore ship engine components and hold a stock of exchange piston crowns, cylinder covers, exhaust valves and seats at strategic locations including Europe, Dubai, Singapore, São Paulo and three Chinese locations.

Fuglesangs as

NORWAY

Product name	Product description
GASKETS
SEALING PRODUCTS

Huhnseal AB

SWEDEN

Product name	Product description
MECHANICAL SEALS

Karmsund Maritime Offshore Supply AS

NORWAY

Product name

Product description

GASKETS

Karmsund Maritime Offshore Supply AS (KaMOS®) developed and have since 2005 offered the leak test method for flanges with raised face and flat face that determine whether tightness has been achieved on all sealing surfaces before the flange and pipe are subjected to internal pressure, as well as monitoring the flange connections for future leakages.

The KaMOS® method is based on pressurizing the annular space between primary and secondary sealing using test medium. If no pressure loss is recorded the seal is deemed tight.

The test gas is applied using a small portable equipment containing: pressure bottle, manometer and hoses. This test equipment is designed to enable flanges to be tested on a one- off basis without pressurizing entire system.

The KaMOS® gasket may be used several times in installations by getting new sealing material on the metallic core.

Klüber Lubrication Nordic AS

NORWAY

Product name	Product description
BONDED COATINGS

Larsen A/S Maskinforretning, Alf I

NORWAY

Product name	Product description
GASKETS

Lund Maskin AS, E.

NORWAY

Product name	Product description
GASKETS

MCT Brattberg AB

SWEDEN

Product name	Product description
SEALS	The major maritime and offshore application areas are given here along with the main threats in these environments. Cable and pipe transits are primarily used for applications in hazardous maritime and offshore environments where the possibility of fire, explosions, water penetration or other danger poses a real threat, and where the rapid access to emergency services is limited or non-existent.

Motec

BELGIUM

Product name	Product description
Removable flangebelt protections

NHS Transmisjoner AS

NORWAY

Product name	Product description
FLANGES

Norborn Industries A.S

NORWAY

Product name	Product description
SEALS, MECANICAL	Representing: Depac GmbH, Austria Tekhniseal Ltd., England Delivery program: Pumps, spare parts for all kinds of pumps for vessels, mechanical shaft seals, exhaust compensators, steel compensators, rubber compensators, pipe couplings.

Nordic Flanges AB

SWEDEN

Product name	Product description
FLANGES	Nordic Flanges produces and stocks flanges, collars, welding rings and loose flanges. Both customized and standard variants.

Olsen AS, Otto

NORWAY

Product name	Product description
BONDED SEALS
ENGINE PACKINGS
GASKETS
GASKETS, PTFE
GASKETS, WITHOUT ASBESTOS
MECHANICAL SEALS
OIL AND GASKET
O-RINGS
SEALS, HYDRAULIC
SOLVENTS GASKETS

Qvale & Partners AS, Ulrik

NORWAY

Product name	Product description
CYLINDER COVERS
CYLINDER LINERS
HEAT EXCHANGER GASKETS
SHAFT SEALS

Roplan AB

SWEDEN

Product name	Product description
MECHANICAL SEALS

ROS AS (Reed Olsen & Schytz)

NORWAY

Product name	Product description
AXLE LINERS
SHAFT SEALS

RS Components AS

NORWAY

Product name	Product description
SEALS
SEALS, MECANICAL

Rygg Gummi AS

NORWAY

Product name

Product description

GASKETS

RYGG GUMMI AS produces seals and gaskets for the ship- and offshoreindustriy and the other industries in Scandinavia. 

30 years of experience gives a great knowledge for the production of seals and gaskets. We have a variety of over 2000 different profiles within the qualities of neopren, nitril, epdm and flameresistent rubber. If you are unable to find your profile, we have our own toolmaker who can develop your profile.

Our spesiality is high quality, short deliverytime and good service. Express delivery the same day if we receive your order before 09.00 o'clock (expresscharge).

We welcome you as a new customer.

- Squereseals and hatchgaskets - Norwegian standard NS2511 - Roundseals - Selfadhesive selas - Rubberplates - B-profile - Containergaskets - D-profiles - Glass-seals - Cold room gaskets - "Cling to" -seals - L-profiles - P-profiles - Hoses - Special profiles - T-profiles - Trapesform - Triangleform - U-profiles - Custom made profiles

SEALS

RYGG GUMMI AS produces seals and gaskets for the ship- and offshoreindustriy and the other industries in Scandinavia. 

30 years of experience gives a great knowledge for the production of seals and gaskets. We have a variety of over 2000 different profiles within the qualities of neopren, nitril, epdm and flameresistent rubber. If you are unable to find your profile, we have our own toolmaker who can develop your profile.

Our spesiality is high quality, short deliverytime and good service. Express delivery the same day if we receive your order before 09.00 o'clock (expresscharge).

We welcome you as a new customer.

- Squereseals and hatchgaskets - Norwegian standard NS2511 - Roundseals - Selfadhesive selas - Rubberplates - B-profile - Containergaskets - D-profiles - Glass-seals - Cold room gaskets - "Cling to" -seals - L-profiles - P-profiles - Hoses - Special profiles - T-profiles - Trapesform - Triangleform - U-profiles - Custom made profiles

SafeTbag Norway AS

NORWAY

Product name	Product description
SEAL AND PROTECTING SYSTEMS	SEAL AND PROTECTING SYSTEMS We Seal and Protect everything, ex; boats, Rov systems, vinches for Crane and Rov systems. The startup will go better if you take care of the things you care for. We use well knows products for Conservation for the weather wear and tear.

Sandvik Materials Technology AB

SWEDEN

Product name	Product description
FLANGES	TUBE, PIPE, FITTINGS AND FLANGES Sandvik is a leading manufacturer of seamless tube and pipe in an extensive program of stainless steels, nickel alloys, titanium, zirconium and other advanced materials. Sizes range from 0.5 to 260 mm (0.01968 to 10.23 in.) outside diameter.

Seal Engineering AS

NORWAY

Product name	Product description
FLANGE GASKETS
GASKETS
MECHANICAL SEALS
O-RINGS
SEALS
SEALS, HYDRAULIC

Trelleborg Industriial Products Norway AS

NORWAY

Product name	Product description
SEALING SOLUTIONS	SEALING SOLUTIONS Sealing and bearing solutions for on-deck machinery. Precision seals for various Offshore applications such as Seismic Guns, Drilling Motors, Skidding Systems, Valves and Fire Fighting Vessels.

Trelleborg Sealing Solutions Norway AS

NORWAY

Product name	Product description
GASKETS
O-RINGS
PNEUMATIC SEALS
ROTARY SEALS
STATIC SEALS

Walker Norge AS, James

NORWAY

Product name	Product description
ENGINE PACKINGS	Lionpak® is a comprehensive range of compression packing products offering exceptional performance and value across the widest range of applications. LionpakWith over 30 products to choose from, Lionpak is a range of packing options, designed and manufactured using the latest techniques and materials to meet a wide variety of technical and commercial expectations across industrial and geographical markets. Lionpak compression packing products are available in materials to match all applications, plant operating conditions and maintenance regimes.
FLANGE GASKETS	James Walker manufactures and supplies complete ranges of metallic and semi-metallic joints, gaskets and sheet jointings to suit every industrial application. In addition, we produce precision-cut flat gaskets to any shape, size and quantity from any sheet material, including our own extensive ranges of jointings. A vast stock of flange gaskets is held ready for immediate despatch, and we can economically cut non-standard profiles of any complexity within minutes. Our work at the frontier of sealing technology gives us a clear understanding of the roles that gaskets must play, for example… - If joint faces are absolutely flat and aligned true. - If flanges do not distort under load. - If loaded bolts do not stretch or relax there is no need for a gasket, because the joint will be perfect. In the real world, such perfection is very expensive to achieve and almost impossible to maintain. Therefore a gasket is the most practical and cost effective way to seal a bolted flange joint. The problem for designers and maintenance engineers is to select the correct gaskets to ensure the integrity and safe operation of their fluid handling plant.
GASKETS	James Walker manufactures and supplies complete ranges of metallic and semi-metallic joints, gaskets and sheet jointings to suit every industrial application. In addition, we produce precision-cut flat gaskets to any shape, size and quantity from any sheet material, including our own extensive ranges of jointings. A vast stock of flange gaskets is held ready for immediate despatch, and we can economically cut non-standard profiles of any complexity within minutes. Our work at the frontier of sealing technology gives us a clear understanding of the roles that gaskets must play, for example… - If joint faces are absolutely flat and aligned true. - If flanges do not distort under load. - If loaded bolts do not stretch or relax there is no need for a gasket, because the joint will be perfect. In the real world, such perfection is very expensive to achieve and almost impossible to maintain. Therefore a gasket is the most practical and cost effective way to seal a bolted flange joint. The problem for designers and maintenance engineers is to select the correct gaskets to ensure the integrity and safe operation of their fluid handling plant.
O-RINGS	The seemingly humble O-ring is an exceptionally versatile sealing device. Applications ranging from garden hose couplings to critical aerospace or oil and gas duties make it the world's most popular volume produced seal. We have been making top-quality O-rings since this sealing method was introduced in the 1930s. Today we stock many thousands of types and sizes in our most popular materials - including RGD-resistant grades - ready for same day despatch. If the rings you want are not available off-the-shelf, we can precision manufacture them within hours, if necessary. With our 'lean' manufacturing plant and flexible production schedules, we can meet industry's most urgent requests.
SEALS, MECANICAL	We supply mechanical seals of every type, and for virtually every application, on a worldwide basis. Mechanical SealsThese are top-quality products, sourced from highly reputable manufacturers including some of our own companies that have dedicated design expertise and machining facilities for mechanical seals. James Walker Mechanical Seals specialises in the design, manufacture and reconditioning of mechanical seals for pumps. We have a great depth of experience and skill at understanding seal performance and designing in performance improvements to produce superior pump performance and reliability. We can produce specialised designs in small or large quantities and ship anywhere in the world. We also have a wide range of standard seals in stock catering for a wide range of plant and process applications and fluid media. Our business is sealing solutions. We work with our customers to supply outstanding service, performance improvement and cost reduction in mechanical seal technology.
SOLVENTS GASKETS	James Walker manufactures and supplies complete ranges of metallic and semi-metallic joints, gaskets and sheet jointings to suit every industrial application. In addition, we produce precision-cut flat gaskets to any shape, size and quantity from any sheet material, including our own extensive ranges of jointings. A vast stock of flange gaskets is held ready for immediate despatch, and we can economically cut non-standard profiles of any complexity within minutes. Our work at the frontier of sealing technology gives us a clear understanding of the roles that gaskets must play, for example… - If joint faces are absolutely flat and aligned true. - If flanges do not distort under load. - If loaded bolts do not stretch or relax there is no need for a gasket, because the joint will be perfect. In the real world, such perfection is very expensive to achieve and almost impossible to maintain. Therefore a gasket is the most practical and cost effective way to seal a bolted flange joint. The problem for designers and maintenance engineers is to select the correct gaskets to ensure the integrity and safe operation of their fluid handling plant.