Suppliers offering marine Main boilers


	641 - Main boilers

	STEAM AND HEAT SOLUTIONS
	www.parat.no
	STEAM AND HEAT SOLUTIONS
	www.parat.no
	STEAM AND HEAT SOLUTIONS
	www.parat.no
	STEAM AND HEAT SOLUTIONS
	www.parat.no

Show map

Supplier name

AB&Co - TT Boilers A/S

DENMARK

Product name	Product description
STEAM BOILERS	AB&CO manufacture a wide range of customised steam boilers especially for demanding operations, where reliability and long term costs are the key words - and not just the lowest purchase price. The range includes special design such as boilers for ULTRA-HIGH STEAM PRESSURE - and in stainless steel as CLEAN STEAM boilers.

Alfa Laval Nordic AS

NORWAY

Product name

Product description

EXHAUST GAS CLEANING

EXHAUST GAS CLEANING

PureSOx PureSOx is a highly effective sulphur-removal system, and the first installed and operated as a main engine (21 MW) exhaust gas scrubber. It ensures compliance with new IMO legislation restricting sulphur emissions, which will begin taking effect in 2015. Sulphur is scrubbed from the vessel’s exhaust gas in an open loop with seawater or a closed loop with fresh water. The ability to switch between these two modes gives PureSOx unique operational flexibility, while its modular construction – which includes options for multiple inlets – ensures a compact and energy-efficient scrubber installation. - Sulphur removal in accordance with IMO MEPC 58 and 59 (in effect 2015 for ECA, 2020 worldwide) - Sulphur removal rate >98% (exceeds IMO requirements) - Particulate matter (PM) trapping up to 80% - Ability to operate in low-alkalinity waters in freshwater mode - Only minimal sludge generation in freshwater mode - One solution for main engine, auxiliary engine and boiler exhaust - Multiple-inlet options to reduce the number of scrubbers on board - Upgradable design for compliance with future legislation - Well-proven technology tested at MAN Diesel & Turbo’s facilities - Short payback time (1-2 years) thanks to fuel cost savings - Operating power consumption: approximately 1.5% of engine power

Click to view product documents


Alfa Laval Product Brochure 2012	pdf
Marine essentials Equipment and services for marine applications	pdf

Farco AS

NORWAY

Product name

Product description

OIL BURNERS

Repr. for: Kabola Heating Systems, Holland KABOLA oljefyrte fyrkjeler og båtovner 3,4-116kW. (Se også Sentralvarmekjeler)

Click to view product documents


KABOLA - Oljefyrte båtovner og fyrkjeler KABOLA B-Tap serie og KABOLA Old Dutch og Old English-serie	jpg
KABOLA - Oljefyrte båtovner og fyrkjeler KABOLA B, E og S-serie	jpg

Fremo AS

NORWAY

Product name

Product description

OIL BURNERS

Click to view product documents


Oil Burner HF-740	pdf
Oil Burner F-50	pdf
Oil Burner F-3	pdf
Oil Burner HF-930	pdf

Mahadev Corporation

INDIA

Product name	Product description
OIL PURIFIERS

Parat Halvorsen A-S

NORWAY

Product name

Product description

ELECTRICAL CIRCULATION STEAM BOILERS

ECS - ELECTRICAL CIRCULATION STEAM BOILERS

The PARAT Electrical circulation steam boiler was designed to meet the request for a modular and easy to install alternative to MGO fuel for auxiliary boilers on existing vessels in operation. By integrating the ECS in your boiler you have the option to maintain your steam pressure from an electrical power source (shore power, spare generator power etc.). The unit can be installed on any kind of existing steam boiler system and is also a good solution for newbuilds where increased fuel flexibility for the steam system is required.

The electrical cabinet is not directly connected to the boiler unit. This ensures a low temperature in the electrical components. The cabinet is standardized, and type approved according to the NEK 400. Included are fuses, contactors and complete safety system. As an option the unit can be delivered with a main power switch. The boiler unit is designed for vertical or horizontal installation depending on the layout and space availability around the main auxiliary boiler. Inlet and outlet connections to main boiler will be done on site.

The ECS can be delivered as a standard modular unit in capacities up to 400kW, which is equivalent to 600kg steam per hour. Larger capacities can be provided upon request.

ELECTRICAL STEAM BOILERS The Parat Electrical element boiler can be delivered with capacity up to 5000 kW. With our 40 years of experience in marine boilers PARAT has landed on a rugged design that fulfills all class requirements.

The electrical element boiler is very compact, and one of the greatest advantages with this product is the possibility of low load regulation, down to 15 kW. No smoke stack is needed, thus saving space and costs.

The electrical cabinet is not directly connected to the boiler. This ensures a low temperature in the electrical components. The cabinet is standardized, and type approved according to NEK 400. Included in the cabinet is the main switch, fuses, contactors and a complete safety and control system. This system is based on a Siemens PLC SIMATIC S7 system with a touch panel for local operation. Communication with the main control system is possible, via analog and digital signals to bussystems as PROFIBUS and MODBUS. The safety system is independent from the PLC system.

For vessels with ORO operation class, Parat has developed a successful package containing a heat exchanger for the hot water system and steam lances for heating of the ORO tanks.

The patended Parat MEL-C was developed to meet the demand for a compact and flexible system that allows the operator to use one boiler system for both steam and hot water production. In normal operation the boiler generates hot water at an operating temperature of 90oC. When there is a requirement for steam production the water level in the boiler is reduced to provide a sufficient steam separation area. Hot water production is maintained separately by an electric heater in a bypass circuit.

The MEL-DC was developed to enable connection to direct current power supply.  It is based on our standard MEL low Voltage boiler but with specialized immersion heaters and control panel.

Click to view product documents


Marine Boilers	pdf
ECS Electrical Circulation Steam Boilers	pdf
Offshore Heating Solutions	pdf

HOT WATER BOILERS

MVH Vertikal Hot Water Boiler

The PARAT MVH is a vertical smoke tube hot water boiler. Vertical design gives the smallest possible footprint and increases the flexibility when placing the boiler in a limited space area.

The oil burner is mounted at the side, easy accessible for inspection and maintenance. The combustion chamber is well dimensioned for burning of MDO and HFO. The boiler is delivered as a complete unit, insulated and preassembled with all valves and instruments, oil burner and control panel.

The Hot water boiler can be delivered with integrated electrical heating elements. The immersion heaters are installed along the side of the boiler shell for easy access and maintenance.

The control system is designed to achieve an unmanned engine room. The system is fully automatic and operates with electronic controllers and electric/pneumatic actuators. The panel is mounted on the boiler side. All control of the boiler panel is operated from the local touch screen. Boiler PLC can be connected to main control system by standard ethernet/profibus/modbus communication.

Click to view product documents


Marine Boilers	pdf
MVH Vertical Hot Water Boiler	pdf
Offshore Heating Solutions	pdf

STEAM BOILERS

Parat steam boilers. Capacity 750 - 25.000 kg/h. Parat oilfired steam boilers, exhaustì gas boilers or combined exhaust gas/oilfired steam boilers

Click to view product documents


PARAT MVS Oil Fired Smoke Tube Boiler	pdf
Offshore Heating Solutions	pdf
PARAT MCS Combined Smoke Tube and Exhaust Gas Boiler	pdf
Marine Boilers	pdf
Worldwide Service	pdf

TANK HEATING SOLUTIONS

Tank Heating Solutions for Oil Spill Response Vessels

Oil spill incidents are unplanned and unwanted events that can have dire consequences for the environment and fragile ecosystems around the globe. Fast response combined with the correct equipment able to cope with any type of hydrocarbon emulsion is vital to minimize the risk involved in extracting, processing and transporting petrochemicals outside our coastlines.

Parat Halvorsen, in close cooperation with yards and ship owners, has developed a system that strengthens one vital part of the response value-chain in a very cost efficient way. A heating system that is fully integrated into the response vessels utility and heat recovery loop - and that in moments can be re-mobilized to deliver steam through specially engineered injection nozzles into the tanks that carry recovered hydrocarbons.

Ulmatec Pyro AS

NORWAY

Product name	Product description
EXHAUST GAS ECONOMIZER	PYRO™ Exhaust Gas Economizer Captures exhaust thermal energy and converts to hot water Features - Automatic control -Built-in bypass - Integrated soot cleaning - Simplicity in design - Insulated - Minimized moving parts - Low back-pressure - Interface with Ulmatec WERS

641 - Main boilers