Brakes, couplings & shafts
Information
Suppliers
Documents
Specialist in water treatment and environmental protection systems
Jowa Norge
www.jowa.no
Search for products in this list:
Show map
Supplier name
Alf I. Larsen A/S
NORWAY
Product name
Product description
TRANSMISSIONS
Transmissions are one of our oldest product groups. Within this group you will find: electric motor, gears and gearboxes, power transmission, bearings, laser alignment and condition control, assembly and disassembly equipment. You can find the items you are looking for by clicking on the groups below, or by going to the search in the upper right corner. We are helpful with the selection and dimensioning of equipment.
Cathwell AS
NORWAY
Product name
Product description
PROPELLER SHAFT GROUNDING
Slip ring Elevated silver band reduce dirt for best possible contact. Silver slip band Reliable contact. Easy installation. Brush holders Double and single brush holders for grounding and measurement. Strong springs for proper brush pressure. Silver brushes High purity silver brushes for proper shaft grounding. Monitoring instrument Continuously monitoring the shaft potential. Remote reading optional.
Cofundi - Aluminium Casting
SPAIN
Product name
Product description
BRAKES
Another type of part manufactured for naval is an inertia brake, reducing vibration. They are situated in a reduction system attached to the crankshaft vibration of a marine engine. In this case the piece has now reached 35 kg and is made by permanent mold and chemical molding, with a gross weight of 60 kg Such pieces have a complicated morphology and also a high added value. Not only that, but laborious process is therefore necessary, for example, machining is done in several stages and balanced. The required alloy AlSi7Mg this piece is, and then to manufacturing is applied T6 heat treatment. If you can not find the item you are looking for, please contact us.
TRANSMISSION RINGS
One of the parts that Cofundi is currently doing since 2010 is the ring of transmission used in the naval sector. These same parts are used in wind turbines. This part reaches 20kg, and has a considerable size, but despite this is done in permanent mold, giving a gross weight of 35 kg, and hence and requested for the mechanical characteristics. This ring was manufactured under inspections and audits of maritime GL, DNV, LRS, reflecting the quality with which the parts are delivered. It consists of the AlSi12 alloy, and does not require heat treatment.
Dellner Bubenzer AB
SWEDEN
Product name
Product description
BRAKE EQUIPMENT
Our own products: Hydraulic disc brakes and bearing housing (our own production): - Model SKD - Pressure applied, spring released disc brakes. - Model SKP - Spring applied, hydraulic pressure released disc brakes. Brake disc Hydraulic aggregates Custom-made brake systems STL systems (Stopping, Turning, Locking) Locking devices Bearing housing Agency products: Coremo - Pneumatic disc brakes and multiple-disc brakes. Eaton Airflex - Pneumatic multiple-disc- and drum brakes. Prodan - Hydraulic / Pneumatic / Electromagnetic brakes and couplings. Antec - Electrohydraulic drum brakes. Powerdrive - Electromagnetic brakes. Buisness area: Example on areas where our Dellner Brakes are used: Power plant industry. Stop- and hold brakes for water power turbines. Stop- and hold brakes for wind power rotors. Hold brakes for wind direction installations on wind power plants. Steel and metal industry. Stop brakes for pipe systems, band and wire systems. Cutting machines for steel profiles. Hold brakes for fixtures in the metal prepare industry. Hold brakes for material handling systems. Cranes and traversers. Emergency, stop- and hold brakes for industy traversers, harbour cranes, building cranes etc.. Emergency- and positioning brakes for cranes in high storehouses. Marine industry. Stop- and hold brakes on propeller shaft and thrusters. Hold brakes on anchor winches.
PROPELLER SHAFT BRAKES
Eie Maskin AS
NORWAY
Product name
Product description
BRAKES
Brakes, Clutches and Slats Brakes, clutches and discs from Ortlinghaus. High quality products for industry Brakes and clutches from Ortlinghaus as ex. hydraulic brakes and couplings, electric brakes and couplings, pneumatic brakes and couplings, highly elastic couplings and slats
CURVED TOOTH COUPLINGS
Curved tooth coupling Arcuate couplings from Green Gear Transmissioni. Curved tooth couplings for industrial use Green Gear Transmissioni has extensive experience in producing the best possible technical solutions together with customers. The company stands for high quality at competitive prices. - many different designs - both for horizontal and vertical mounting - available in stainless material - shaft diameter up to 1,800mm - high torque in relation to the physical size - rated torque up to 11,000kNm
HOLLOW SHAFT MOTORS
Hollow shaft motors Choose from a variety of torque and gear ratios. High quality hollow shaft motors Stöber Pipedrive hollow shaft motors and Framo hollow shaft motors are of high quality and unique solutions. Hollow shaft motors for machine constructions. Choose from a variety of torque and gear ratios.
LINEAR MODULES
Linear modules Linear modules from Rollax and HSB Automation. Linear modules for high precision Choose between linear modules from ROLLAX and HSB Automation.
LINEAR PRODUCTS
Linear products Linear products specially developed for tough demands from the industry. Complete systems and customized solutions Linear products such as linear tables, rail guides, plain bearings, combination bearings, profiles, ball guides, ball screws and much more.
SHAFT COUPLINGS
Shaft couplings Shaft couplings are available in a wide technical range. Shaft couplings in different variants The devices come in different types and variants to optimize for their application. Opportunities to modify existing devices according to their wishes. Non-slip couplings can be combined with different types of couplings, eg with safety coupling shaft length up to 6 meters. Suitable in systems where you want to synchronize and connect several gears with each other in series. - Maintenance free - Torsion stiff - Softer drives - Low weight
SHAFT-HUB CONNECTIONS
Shaft-hub connection EIE Maskin AS offers shaft-hub connections from ETP Transmission. Extremely fast assembly ETP Transmission AB has 35 years of experience in the development and production of shaft-hub connections. They have a leading position in hydraulic fixed mounting for general machine construction, industrial woodworking and metalworking. ETP principle: "a hydraulic pressure medium enclosed in a double-sided sleeve is pressurized by means of one or more bolts. The pressure is evenly distributed along and around the shaft hub. The double-sided sleeve expands and provides a uniform contact pressure against the shaft hub. - extremely fast assembly / disassembly, just one screw for locking - compact design for space-consuming applications - radial access of screw, saves space long shaft - for shaft dimensions 15-130mm as standard - stainless steel design 15-80mm - good roundness for high precision
SHAFTS
PTO shafts and joints Cardan shafts for industrial use from Elbe Elso. Wide product range for industrial use - manufactures propeller shafts for industrial use - wide product range - nominal torque ~ 260,000Nm - angle -45 ° single knot - angle -55 ° double knot - connection: DIN, SAE and Mechanics
GearConsult AS
NORWAY
Product name
Product description
COUPLINGS
The Couplings made by RENK are used in all industrial Fields of application. The range of the RENK plant in Rheine includes curved-tooth couplings, high-speed diaphragm and Raflex ® flexible disk couplings, HYGUARD ® safety Couplings and TORLOC ® clamping elements. RENK Longlife Grease is a special, long fibre grease with high adhesive force, which maintains its full lubrication properties even over extended time periods. The thixotropic structure ensures best dropping safety during standstill, even under the most unfavourable installation positions. Maintenance intervals are typically 25 000 operations hours or 5 years at longest. It corresponds with major inspection intervals of power stations and with API-requirements.
Jowa Norge A/S
NORWAY
Product name
Product description
PROPELLERSHAFT EARTHING SYSTEMS
The high efficient Propeller shaft Earthing System PES will prevent the micro pitting marks at the propeller, on the sliding surfaced of crankshaft journals and main bearings of the engine to be assumed as spark erosion. PES serves for short circuit between the rotating propeller shaft and the ship's hull.
Click to view product documents
Propellershaft Earthing System
pdf
Knudtzen AS, JF
NORWAY
Product name
Product description
COUPLINGS
- Terminal Blocks - Grounding / Shielding - Distribution and coupling terminals - HDC Machine Connectors - Circular pins - Collecting rails - DIN rails
KTR Systems Norge AS
NORWAY
Product name
Product description
ACTIVE FLOATING CALIPER BRAKES
Click to view product documents
Brake Systems
pdf
BRAKE SYSTEMS
- Active fixed caliper brakes - Active floating caliper brakes - Passive floating caliper brakes - Thruster brakes - Yaw brakes - Rotor Lock - Control system - Clamping systems
Click to view product documents
Brake Systems
pdf
COUPLINGS
- Elastic jaw and pin & bush couplings - Gear couplings - Backlash-free servo couplings - Steel lamina couplings - Flange couplings - Magnetic couplings - Fluid couplings
Click to view product documents
Drive Technology
pdf
DRIVE TECHNOLOGY
Power transmission Technology - Coupling - Torque limiters - Clamping sets and Precision Joints - Torque measuring technology
FLEXIBLE COUPLINGS
EVOLASTIC® highly flexible coupling High elastic shaft couplings and flange couplings EVOLASTIC® is a highly flexible, non-slip and backlash-free shaft and flange coupling for versatile application in a large number of main and auxiliary drives in mechanical and plant engineering. The elastomer element prestressed to pressure enables the coupling to reduce torsional vibrations in the drive train and smoothly absorb overload shocks while damping structure-borne noise efficiently. In parallel it operates in three dimensions (axially, radially and angularly) compensating for displacements above average. The basic versions distinguish between directly screwed and plug-in types. They cover all functional mounting conditions ranging from the finished individual element through hub/hub and flange/hub applications to the drive shaft. In addition the product portfolio allows for highly individual and flexible mounting options tailor-made for the special application.
FLEXIBLE FLANGE COUPLINGS
SINULASTIC® highly flexible flange couplings for versatile applications KTR SINULASTIC is a modularly structured series of highly flexible flange couplings based on a disk-shaped coupling body. Four practical basic versions with individual properties cover a wide range of applications primarily for diesel engine drives, but also general drive tasks. By using different elastomer materials, this coupling series can be used in applications of up to + 130°C ambient temperature. Applications of the highly flexible flange coupling SINULASTIC: The main task of the coupling is reducing torsional vibrations resulting from excitations of the I. C.-engine during standard operation and misfire operation as well as protecting the drive from overload. It is a good option both for variable speed and constant speed drives, while a supercritical selection of the drive train above resonance level is made. Particularly for the series the coupling disk requires smallest possible axial mounting space. Depending on the type the coupling is pluggable and compensates for displacements resp. tolerances moderately to very well. It is a non-slip or shear type and radially mountable.
PASSIVE FLOATING CALIPER BRAKES
Click to view product documents
Brake Systems
pdf
SHAFT COUPLINGS
ROFLEX® failsafe shaft couplings Torsionally flexible, failsafe shaft couplings A particular feature of the torsionally flexible and failsafe ROFLEX® shaft coupling is its short design resp. short DBSE [Distance Between Shaft Ends]. Short shaft distance dimensions allow for space-saving power packs. A new option of the proven coupling according to DIN 740 is its combination with a split cam section (ROFLEX SH) which is manufactured via fracture separation, also called cracking. In times of availability, ease of servicing, compact designing and operational safety the properties to be short and easy to service are a vital benefit that every operator appreciates. It goes without saying that the ROFLEX offsets any kind of shaft displacement (axial, radial, angular) reliably while damping shocks and reducing torsional vibrations. The ROFLEX is approved for use in potentially explosive atmospheres. This is confirmed by the ATEX approval that applies for the European region and the EAC declaration which is intended for the Eurasian region. The ATEX type examination certificate and EAC certificate are specified in the menu item "Service".
THRUSTER BRAKES
Click to view product documents
Brake Systems
pdf
YAW BRAKES
Click to view product documents
Brake Systems
pdf
Lilaas AS
NORWAY
Product name
Product description
ELECTRONIC SHAFT SYSTEM
AESS (Electronic Shaft System) is developed by Lilaas AS. The Electronic Shaft System is a network system for up to 8 control lever positions and up to 4 propulsion engines in one redundant network. Each control lever is a node in a network and consists of one control lever with servo systems and an electronic unit. The system administrates the master position selection, slave positions and fault detection. The network is based on the CAN bus standard (Controller Area Network.) The CAN bus is a well proven standard originally designed for vehicles. Due to its simplicity and operability in harsh environment this standard is used in a wide range of applications, such as industrial, medical and nautical. The network in AESS is dual redundant with two physical separated buses. This electronic shaft system is very flexible, and can be used in a wide range of applications with our control units
Lund Maskin AS, E.
NORWAY
Product name
Product description
TRANSMISSIONS
- TRANSMISJONER Kileremmer Kileremskiver Kjededeler Kjedehjul Kjeder Rullekjeder Tannremmer Taper-lock boss Taper-lock kileremskiver Taper-lock kjedehjul
Maritim Motor A/S
NORWAY
Product name
Product description
CHOCKING
Maritim Motor has the pleasure of presenting a new distribution agreement with German Henkel for the product Marine Chocking. Fixmaster® Marine Chocking complements our own product range very well. In addition to sales and distribution, we can also supply pre-certified solutions for the installation and fixing of all possible components for the shipping industry in Norway. For over 130 years, Henkel has been a leader with well-known brands such as Loctite®. A success that, with continuous product development and in close cooperation with our customers worldwide, has created a high-tech product and which we are very proud of. Locktite Fixmaster Marine Chocking is a two-component Epoxy product that is recommended for installation of main engines and other components. Achieves 100% coverage between contact surfaces, precise component alignment, high compressive strength and long durability. Loctite Fixmaster Marine chocking is specifically designed for casting of Maritime propulsion machinery. All types of propeller sleeves and bearings, rudder stock, foot bearings, steering machines, all types of winches, engine room pumps, load pumps, cable bushings, large ball / roller bearings, bow thruster and anchor winches.
Maskin og Skipsutstyr AS
NORWAY
Product name
Product description
TRANSMISSIONS
Maskin og Skipsutstyr as er en av nordvestlandets ledende totalleverandør til bygg- og industrimarkedet. Kompetanse, vareutvalg og skreddersydde forsyningsløsninger, gjør at stadig flere bedrifter velger Maskin og Skipsutstyr som sin foretrukne leverandør. - Kulelager - Rullelager - Nålelager - Sfæriske rullelager - Koniske rullelager - Akselkulelager - Leddlager - Glidelager - Speed sleeves - Løperuller, støtte og kamruller - Y-lager enheter - Lagerhus - Lagerfett - Montering og vedlikehold - Kileremmer - Kileremskiver - Rullekjeder - Kjedehjul - Fleksible koblinger Medlem av TOOLS kjeden.
Mento AS
NORWAY
Product name
Product description
COUPLINGS
- Air / Water hoses - Oil / Bulk hoses - Steam / Chemical hoses - PVC hoses - Special hoses - Bellows/Steel hoses/Teflon hoses - High pressure hoses/Drilling hoses - Unions/Swivels/Valves - Hose Clamps/Fittings/Safety Equipment - Quick Couplings - Hose Reels - Straub Pipe Joints - Hydraulic hoses and Couplings - Adapters and fittings
Motala Verkstad, AB
SWEDEN
Product name
Product description
SHAFTS
Nøsted AS, Avd. Kragerø
NORWAY
Product name
Product description
COUPLING COMPONENTS
Olsen AS, Otto
NORWAY
Product name
Product description
TRANSMISSION PRODUCTS
Transmissions Otto Olsen is Norway's largest and most complete supplier of transmission products. In close collaboration with our customers, we can solve most challenges when it comes to the need for transmission components. The areas of use are diverse, among others: mechanical industry, the food industry, sea and land-based oil and gas activities, wood processing, mining, and more.
RS Components AS
NORWAY
Product name
Product description
COUPLINGS
-Clamp Collars -Gears -Miniature Couplings -Miniature Universal Joints -Roller Chain -Taper Bush Pulleys -Transmission Belts -Twist Link Belting Se eget e-handelsystem med handlekurv på firmaets web-adresse. Egen produkt- katalog i papir- og cd-format sendes på bestilling.
Rubix AS
NORWAY
Product name
Product description
COUPLINGS
Brammer can offer customers the complete drive chain solution. We stock over 7,000 individual product lines from the world’s leading manufacturers (including Gates, Renold, Optibelt, Tsubaki, IPL, KTR, Lenze, Chiorino, Paulstra, Ruland, Ammeraal Beltech/Uni-Chain and Habasit).
Scanco A/S
NORWAY
Product name
Product description
BRAKE EQUIPMENT
Vi lagerfører store mengder av vevde og støpte bremsebånd og bremseplater på vår lager i Bergen. Våre bremsebånd brukes på kraner, vinsjer og draworks. Onshore og offshore. Vi forhandler FERODO kvalitet.
BRAKE LININGS
Vi lagerfører store mengder av vevde og støpte bremsebånd og bremseplater på vår lager i Bergen. Våre bremsebånd brukes på kraner, vinsjer og draworks. Onshore og offshore. Vi forhandler FERODO kvalitet.
Schaeffler Norge AS
NORWAY
Product name
Product description
LINEAR PRODUCTS
Aksler Akselføringer Løperullføringer Kule- og rulleomløpsføringer Føringsskinner Miniatyrføringer Lineære modulføringer Kule- og rulleskruer Tilbehør
Servogear A/S
NORWAY
Product name
Product description
SHAFT BRACKETS
Due to design and location, the shaft brackets in the Servogear controllable pitch propeller system causes minimum drag and resistance. They also ensure no cavitation and improved steering performance. The brackets are of heavy-duty single leg design. They are cast in high tensile stainless steel and NiAlBz. Servogear shaft brackets are also designed with progressive strength. This means that the section modulus of the bracket leg is decreasing from the hull intersection to the bracket barrel. Should a severe grounding occur, the bracket would deform as a “J” – avoiding serious damages like cracks and leakages in the hull. This is an important safety feature. Normally, the shaft brackets can be straightened easily – without the need for replacements.
Transtech AS
NORWAY
Product name
Product description
BRAKE EQUIPMENT
Air Brakes Transtech offers a comprehensive range of high-quality air brakes in many different sizes, with torque capacities up to 1576 Nm. Some of these brakes are available in "negative design," meaning spring applied, pressure release (or in some cases, hydraulically activated). Disc Brakes Our brake manufacturer produces industrial brakes using advanced brake technology. With over 40 years of experience in design, production and selection of the best braking solutions, we can offer a wide range of brakes from 150 N to over 270 000 N of braking force Electromagnetic Brakes Our electromagnetic brakes are the "fail safe" type, meaning they are spring applied and release when the power is switched on.
COUPLINGS
Curved-tooth Couplings Maina offers a broad range of curved-tooth couplings, spindle couplings and universal shafts. Curved-tooth couplings are available for torque from 0.1 kNm (shaft from Ø15 mm) to 15 600 kNm (shaft to Ø1180 mm). Disc Couuplings Our range of robust, high quality flexible steel-disc couplings are used in today's most demanding applications. They are maintenance-free and provide good compensation for parallel, angular and axial deviation. Flywheel Couplings The ARCUSAFLEX coupling is a highly flexible flywheel coupling with an axial plug-in facility, providing a torsionally soft connection between an internal combustion engine and a driven machine. Safety Couplings We offer a vast selection of safety couplings. Our slip hubs are a friction-type torque limiter that provide reliable overload protection at low cost. By utilizing high quality friction material, they are a simple, efficient and accurate method of setting the overload torque. Shrink-fit Couplings Shrink-fit couplings can be mounted easily and without any damages, different from thermally jointed or otherwise jointed frictional connections. The clearance-fit between shaft and hub-disc ensures easy mounting. Steel Bellows Couplings The success of the servo motor and its increasing use in drives of all kinds has set new requirements for couplings. In a majority of applications, couplings must provide a torsional rigid and backlash-free connection between motor shaft and output shaft (i.e. ball screw drives).
Voith Turbo Safeset AB
SWEDEN
Product name
Product description
SHAFT COUPLINGS
Vulkan Skandinavia AS
NORWAY
Product name
Product description
COUPLINGS
Brakes, couplin...
Sign in
Read more
Select language:
Arabic
Bulgarian
Catalan
Chinese_Simplified
Chinese_Traditional
Czech
Danish
Dutch
English
Estonian
Persian_Farsi
Finnish
French
German
Greek
Haitian_Creole
Hebrew
Hindi
Hungarian
Indonesian
Italian
Japanese
Korean
Latvian
Lithuanian
Hmong_Daw
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Slovenian
Spanish
Swedish
Thai
Turkish
Ukrainian
Vietnamese
0 item(s) in cart