Suppliers offering marine Loose floor plates, platforms, steps and ladders in accommod.


	524 - Loose floor plates, platforms, steps and ladders in accommod.


Recnical Insulation	www.rockwool-rti.com

Show map

Supplier name

Desibelprodukter AS

NORWAY

Product name	Product description
CONSTRAINING LAYERS	SWEDAC SRB-latex concrete. Ordinary mortars and concrete have a high compressive strength. However they have a low tensile strength. SWEDAC SBR-latex can minimise these deficiencies, e.g. in a typical mix of 1 part cement, 3 parts coarse sand and using 5 - 8 % by weight of SWEDAC SBR-latex, the tensile strength is doubled. A simple practical demonstration is to paint a slurry of the latex and cement, and a slurry of water and cement onto steel strips. After hardening it will be found that only the strip painted with the latex/cement can be bent without the coating flaking off. This demonstrates the improvement in adhesion and flexibility given by the latex. LANAT PU System Weather resistant polyurethane compound. Can be filled with sand up to 60 volume %. The system includes antislip and UV resistant topcoats.
FLOATING FLOOR	FLOATING FLOOR The SWEDAC Deck covering System is a method of noise control in ships, which acts by preventing vibration of the steel structure. The energy thus absorbed is therefore not available to be radiated as sound in the treated area or in other parts of the ship. Over 200.000 square meters of Swedac Deck covering systems have been installed over the past 15 years. The viscoelastic layer forms the filling of a sandwich construction between the steel of the deck and a constraining layer of latex modified concrete or steel. As the deck flexes under vibration transmitted to it from engines or propellers, the viscoelastic layer is placed in shear. The special property of a viscoelastic material is that it not recover at the same rate as which it is distorted, and energy from the vibration is therefore absorbed, leaving less to be radiated as noise. Approved according to European Union Council Marine Equipment Directive (MED) 96/98 EC. BV 062
LEVELLING COMPOUNDS	SWEDAC SRB-latex concrete. Ordinary mortars and concrete have a high compressive strength. However they have a low tensile strength. SWEDAC SBR-latex can minimise these deficiencies, e.g. in a typical mix of 1 part cement, 3 parts coarse sand and using 5 - 8 % by weight of SWEDAC SBR-latex, the tensile strength is doubled. A simple practical demonstration is to paint a slurry of the latex and cement, and a slurry of water and cement onto steel strips. After hardening it will be found that only the strip painted with the latex/cement can be bent without the coating flaking off. This demonstrates the improvement in adhesion and flexibility given by the latex. LANAT PU System Weather resistant polyurethane compound. Can be filled with sand up to 60 volume %. The system includes antislip and UV resistant topcoats.

Isolamin AB

SWEDEN

Product name

Product description

BULKHEADS

Isolamin bulkhead and lining panels.

Isolamin bulkhead and lining panels are the main component’s in Isolamin’s complete marine interior system. They come in thicknesses from 16 to 100 mm. Those soft core panels are made up as a sandwich construction of sheet steel with a soft, light weight and non-combustible core of mineral or glass wool.

Sound reduction values of up to 51 dB Rw are achieved and fire rating form B0 to A60. The unique panel connection system makes it a total flexible system. The panels are equilateral giving less cut offs at assembling. The C-joint creates an unsurpassed strength at the same time as it makes it easy to remove any panel alone for inspection or replacement in case of damage. This is unique in the business.

Isolamin’s panels system also includes inspection hatches, with fire rating B15, togehter with a range of matching accessories. The entire system, with all components, cooperates to one unit. fullfilling all requrements, rules and regulations.

CEILING PANELS

Isolamin bulkhead and lining  panels are the main component’s in Isolamin’s complete marine interior system. They come in thicknesses from 16 to 100 mm. Those soft core panels are made up as a sandwich construction of sheet steel with a soft, light weight and non-combustible core of mineral or glass wool.

Sound reduction values of up to 51 dB Rw are achieved and fire rating form B0 to A60. The unique panel connection system makes it a total flexible system. The panels are equilateral giving less cut offs at assembling. The C-joint creates an unsurpassed strength at the same time as it makes it easy to remove any panel alone for inspection or replacement in case of damage. This is unique in the business.

Isolamin’s panels system also includes inspection hatches, with fire rating B15, togehter with a range of matching accessories. The entire system, with all components, cooperates to one unit. fullfilling all requrements, rules and regulations.

Marine Aluminium A.S

NORWAY

Product name

Product description

WALL PANELS

Marine Aluminium has developed, manufactured and supplied the Safety Wall Systems since 1984 and these systems have been supplied to most of the Oil & Gas installations in the North Sea. These systems are designed to meet the requirements of explosion blast relief, natural ventilation, weather protection and heat shielding. The construction material is seawater resistant aluminium. •Explosion blast relief •Natural ventilation •Weather protection •Heat shield (Stainless steel)

Optimera AS - Marine Div.

NORWAY

Product name	Product description
WALL PANELS	LiteCore is a collection of Fire resistant solutions for the Marine- and Off-Shore Industry in calcium silicate materials. We provide wall solutions with certificates to meet B0, B15, B30, A0, A60, H120 demands. We can also handle special solutions according to your needs.

R&M Ship Interior AS

NORWAY

Product name	Product description
INTERIOR, PUBLIC AREAS	The interior is unique and, at the same time, features a uniform look and feel throughout the ship. R&M develops the right “steel to steel” turnkey solutions for: •Restaurants and bars •Lounges and reception rooms •Wellness facilities •Theaters, libraries and Internet facilities •Clubs and casinos •Staircases •Pool areas and kids’ clubs

Rockwool Technical Insulation

NORWAY

Product name

Product description

PANELS

Throughout the accommodation areas of a vessel or living quarter, it is required to have B-Class fire restriction zones and fire protection between each cabin. At the same time it is needed to have comfort and noise insulation between each cabin, towards public areas etc.

For the sake of the fire safety owners and producers of ship’s panels and living quarters often require the core of the panels to consist of stone wool. For this purpose the SeaRox Marine Slab (Marine Slab) range of products has proven to be highly successful. ROCKWOOL Technical Insulation has together with the customers developed a great number of special products possessing high compressive and delaminating strength as well as great fire resistance, which has been approved as non-combustible according to latest IMO regulations. The panel and door manufacturers hereby have an outstanding core material for the fabrication of sandwich constructions.

Vestnes Ocean AS

NORWAY

Product name

Product description

SHIP INTERIOR

TURN KEY SHIP INTERIOR:

Vestnes Ocean is supplying “turn key” solutions for Ship interiors. We supply and install insulation, floating floors for sound reduction or A-60, wall systems, ceilings, doors, top covering of floors such as vinyl, carpets, wooden imitations, ceramic tiles and rubber floors etc, galley machinery, cold and freezing rooms, furniture as you can read about Willy, curtains etc up to a complete product as a modern ship accommodation requires.

Together with the ship owner or yard we find the best solutions together. We help with color suggestions and materials to find the optimal solution for the vessel and the customer.

Weber Marine & Offshore

NORWAY

Product name

Product description

DECK SELFSMOOTHING SCREED

The Marine & Offshore industry is a global industry where international owners are required to develop installations and vessels that fulfill a certain class set by international certification bodies and authorities.The industry has a strong driver on specifications that are required to fulfill the class requirements. During a project, key functions and various project stages take place at several geographical locations. Weber global network and relations combined with localmarket knowledge, presence and support give us the ability to follow projects across borders. This is our Global Approach - with Local Presence.

524 - Loose floor plates, platforms, steps and ladders in accommod.