Suppliers offering marine Ballast systems, solid ballast


	801 - Ballast systems, solid ballast

Show map

Supplier name

Berner AS, Christian

NORWAY

Product name	Product description
BALLAST WATER MANAGEMENT SYSTEMS

Eureka Pumps AS

NORWAY

Product name	Product description
BALLAST PUMPS
PUMP SYSTEMS
SEA WATER LIFT PUMPS

Optimarin AS

NORWAY

Product name

Product description

BALLAST SYSTEMS

The type approved Optimarin Ballast System is based on filtration as pre-treatment and high doses of UV irradiation for inactivation of marine organisms, viruses and bacteria, without affecting the normal operation of the ship. Ballast water is UV treated both during ballasting and de-ballasting to ensure the dual UV effect. Ballast water is only filtered during ballasting.

The OBS is one of very few treatment options that does not use or generate chemicals or biocides in its treatment or cleaning processes. It is based on the idea that such systems should be environmentally sound, simple, flexible and easy to install, and capable of operating on both newbuilds and existing vessels.

The Optimarin Ballast System is easy to install on board existing ships (retrofit) as well as on newbuilds. The modulized system is very flexible, with a relatively small footprint and weight, and will fit vessels of all kinds and sizes. The OBS can be delivered as a complete skid or as a customized solution. It accommodates a wide range of ballast water capacities and can handle flows up to 3000 m3/h (or higher upon request).

The Optimarin Ballast System is normally installed in the pump or engine room and in close proximity to the ballast pumps. The OBS can be delivered in a container, on a skid or in separate pieces to allow for easy installation in most any available space. The equipment can be installed horizontally, vertically, on or suspended below deck, along the ship’s side or in several separate locations. It is relatively low weight and adds no extra noise. The OBS utilizes every square meter and does not require much space, this makes it a cost-efficient solution.

UV System

The UV System was developed based on 20 years of experience in water injection on offshore platforms, water treatment for fish farming and drinking water plants in Norway.High power UV for the efficient killing or inactivation of organisms, bacteria and pathogens in ballast water.  One UV lamp per chamber (167 m3/h flow rate per chamber).  Standardized UV chamber, installed in parallel on a single manifold for higher flows.  Developed and manufactured for installation aboard ships.  Optimized for minimum maintenance and ease of operation. It is self-cleaning, with no moving parts or need for chemical cleaning.  UV and temperature sensor in each chamber.

Teamtec A/S

NORWAY

Product name

Product description

BALLAST WATER TREATMENT SYSTEM

TeamTec Oceansaver® BWMS is designed to safely maximize the elimination of waterborne organisms that can be carried in ballast water, consequently, protecting the environment as well as your assets.

Choosing the right ballast water management system is highly important decision as system limitations may halt ship operations. TeamTec Oceansaver BWMS  is designed and approved by USCG to operate without any restrictions. TeamTec will assist you to determine your ballast water treatment needs, design and deliver a high quality system. TeamTec Oceansaver ballast water management technology is based on the principle of filtration and disinfection by side stream electrodialysis. The BWMS can be installed on all types of vessels, and is the preferred system for quality minded owners. Our vast range of models cover capacities from 200 m3/h up to 7200 m3/h flow rate.

Click to view product documents


TeamTec-Oceansaver-BWMS-Brochure_2020	pdf

Turoteknikk Drift AS

NORWAY

Product name

Product description

API STANDARD PUMPS

Many of our pumps are distinctively designed to comply with API's (American Petroleum Institue) most strict specifications. They are complemented with our qualified engineers that have far-reaching experience in the oil industry. Together with our know-how and years of experience in the industry, the Turoteknikk team can provide solutions for the most demanding oil project specifications. 

More details on www.turoteknikk.com

API610 OH2 Horizontal Pumps API610 VS4 TAZN API610 VS5 TC Cantilever API610 ETL/ETLS Inline Diffuser Pump API610 BB2 TDP Series API610 BB2 TDSP Series API610 BB2 TSTP Series API610 VS3 and VS6 Can Pumps (TVCP Series) API674 High Pressure Reciprocating Pumps API675 Diaphragm metering Pumps API676 Progressive Cavity Pumps API676 Gear Pumps API681 Vacuum Pumps API685 Magnetic Drive Process Pumps

CENTRIFUGAL PUMPS

CENTRIFUGAL PUMPS:

Turoteknikk can suppy all types of centrifugal pumps. If you can not find the pump you are looking for on our web pages please send us your inquiry and we will select the correct pump for the application.

OH2 Horizontal Pumps  VS4 Sump Pumps  VS4 TAZN  VS5 TC Cantilever  LD Vertical Diffuser Pumps  ETL Inline Diffuser Pumps  Split Case Pumps  AN/MN Horizontal Pumps  CM/VM/LD Vertical Pumps  CA Self-Prim. Marine Pumps  Side Channel Pumps  GR Self-Prim. Trash Pumps  Rotoprime Petroleum Pumps  Submersible Pumps  BB2 TDP Double Suction  BB2 TDSP Two Stages  BB2 TSTP Pumps  BB3 TSMP Process Pumps  TVCP-VS3/VS6 Can Pumps  Magnetic Drive Pumps

801 - Ballast systems, solid ballast