Trustper AS c/o Hellerøy & Co. DA
Information
Products
Contacts
Trademarks
Documents
Sales representatives
News
Anti-corrosion
Tank cleaning equipment
All product categories
27 - Material protection, external
382 - Tank cleaning systems and equipment
All system groups
Product name
ANTI-CORROSION PROGRAM
Coatscale Remover is a blend of vegetable oils, driers, wetting agents and corrosion inhibitors. Its pri-mary use is as a rust remover and temporary corrosion inhibitor in seawater ballast tanks, prior to application of permanent protective coatings. Coatscale Remover penetrates the porous rust and seeks to the fresh steel surface underneath, where it spreads out making a thin, oily film that loosen the rust. Upon drying, the film ex-pands and "push off" the rust in flakes. Coatscale Remover then dries to a soft, non-sticky coating, which gives a temporary corrosion protection of the fresh metal against seawater and humidity. Coatscale Remover is safe both to the environment and to personnel handling it. It does not contain any hydrocarbon solvents or oils, and all ingredients are completely biodegradable and environmental friendly. Prior to further treatment of the tank surfaces, Coatscale Remover may be removed by the use of a 20% solution of "UNITOR AQUATUFF HIGH FOAM" and high pressure equipment. Then flush with fresh, clean water and leave the surface to dry.Coatscale Remover may also be used for other purposes, i.e. as a semi-hard coat for protection of steel and metal surfaces against atmospheric corrosion.
Visual CSR Treatment Guideline
Pamphlet
pdf
Visual CSR Treatment Guidelinge for application on Repaired Epoxy Coating
Pamphlet
pdf
BALLAST TANK TREATMENT
Coatscale Remover is a blend of vegetable oils, driers, wetting agents and corrosion inhibitors. Its pri-mary use is as a rust remover and temporary corrosion inhibitor in seawater ballast tanks, prior to application of permanent protective coatings. Coatscale Remover penetrates the porous rust and seeks to the fresh steel surface underneath, where it spreads out making a thin, oily film that loosen the rust. Upon drying, the film ex-pands and "push off" the rust in flakes. Coatscale Remover then dries to a soft, non-sticky coating, which gives a temporary corrosion protection of the fresh metal against seawater and humidity. Coatscale Remover is safe both to the environment and to personnel handling it. It does not contain any hydrocarbon solvents or oils, and all ingredients are completely biodegradable and environmental friendly. Prior to further treatment of the tank surfaces, Coatscale Remover may be removed by the use of a 20% solution of "UNITOR AQUATUFF HIGH FOAM" and high pressure equipment. Then flush with fresh, clean water and leave the surface to dry.Coatscale Remover may also be used for other purposes, i.e. as a semi-hard coat for protection of steel and metal surfaces against atmospheric corrosion.
Safety data sheet - Coatscale remover
Pamphlet
pdf
Visual CSR Treatment Guideline
Pamphlet
pdf
Safety data sheet - Coatscale remover II
Pamphlet
pdf
Visual CSR Treatment Guidelinge for application on Repaired Epoxy Coating
Pamphlet
pdf
PROTECTION PROGRAM
Coatscale Remover is a blend of vegetable oils, driers, wetting agents and corrosion inhibitors. Its pri-mary use is as a rust remover and temporary corrosion inhibitor in seawater ballast tanks, prior to application of permanent protective coatings. Coatscale Remover penetrates the porous rust and seeks to the fresh steel surface underneath, where it spreads out making a thin, oily film that loosen the rust. Upon drying, the film ex-pands and "push off" the rust in flakes. Coatscale Remover then dries to a soft, non-sticky coating, which gives a temporary corrosion protection of the fresh metal against seawater and humidity. Coatscale Remover is safe both to the environment and to personnel handling it. It does not contain any hydrocarbon solvents or oils, and all ingredients are completely biodegradable and environmental friendly. Prior to further treatment of the tank surfaces, Coatscale Remover may be removed by the use of a 20% solution of "UNITOR AQUATUFF HIGH FOAM" and high pressure equipment. Then flush with fresh, clean water and leave the surface to dry.Coatscale Remover may also be used for other purposes, i.e. as a semi-hard coat for protection of steel and metal surfaces against atmospheric corrosion.
Visual CSR Treatment Guideline
Pamphlet
pdf
Visual CSR Treatment Guidelinge for application on Repaired Epoxy Coating
Pamphlet
pdf
Trustper AS c/o...
Sign in
Read more
Select language:
Arabic
Bulgarian
Catalan
Chinese_Simplified
Chinese_Traditional
Czech
Danish
Dutch
English
Estonian
Persian_Farsi
Finnish
French
German
Greek
Haitian_Creole
Hebrew
Hindi
Hungarian
Indonesian
Italian
Japanese
Korean
Latvian
Lithuanian
Hmong_Daw
Norwegian
Polish
Portuguese
Romanian
Russian
Slovak
Slovenian
Spanish
Swedish
Thai
Turkish
Ukrainian
Vietnamese
0 item(s) in cart