Marine products offered by Spirax Sarco AS (Norge)


	Spirax Sarco AS (Norge)

Information

Products

Contacts

Trademarks

News

Product name

ACTUATORS

Pneumatic actuators for valves are to NAMUR standard, spring to open or spring to close, and incorporate a rolling nitrile rubber diaphragm.

Electric valve actuators
Using the same valve range as the pneumatic actuators, electric actuators provide an alternative solution to applications that require an electrical
power supply. A comprehensive range of accessories is available.

BOILER CONTROL PANELS
Boiler controls and systems: - Feed tanks - Steam injectors - Level controls - TDS blowdown controls - Sample coolers - Conductivity meters - Heat recovery systems - Blowdown vessels - Vent heads - Bottom blowdown systems

COMPRESSED AIR

Compressed air products:
- Filters 
- Regulators 
- Lubricators 
- Filter\Regulators 
- Isolators, drain traps and
ancilliares

CONDENSATE PUMPS

Condensate pumps and energy recovery:
- Pressure powered pumps 
- Electric pumps 
- Flash steam recovery vessels

CONTROL EQUIPMENT
Electronic and Pneumatic controllers for temp., level, flow pressure etc. Filters remove harmful liquid and solid contaminants from air lines to preserve the life and efficiency of equipment downstream.

CONTROL SYSTEMS
Control systems: - Control valves - Pneumatic actuators - Electric actuators - Positioners, controllers, sensors - Self-acting controls - Pressure reducing valves - Safety valves

CONTROL VALVES
Two and three port control valves manufactured in SG iron, cast steel and stainless steel ranging from DN15 to DN250. The valves can be used on pressures up to 100 bar and are available with screwed or flanged connections. Pneumatic actuators are to NAMUR standard, spring to open or spring to close, and incorporate a rolling nitrile rubber diaphragm.

FLOWMETERS

Flowmetering:
- Spiraflo meters 
- Gilflo meters 
- Vortex meters 
- Orifice plate meters 
- Computers, displays and transmitters
- DIVA meters

HEAT EXCHANGERS
Shell and plate heat exchangers: PSHE (Plate and Shell Heat Exchangers) Manufacturer of a wide range of fully welded (no gaskets) plate heat exchangers (Plate and Shell). Pressures up to 120 bar. Temperatures up to 400 oC (standard, higher on request). Up to 100 MW. Maximum heating surface per unit 1.800 m3. Supplied in 6 different sizes. Very compact with low weight. Wide range of materials in shell and plate. PRHE (Plate and Ring Heat Exchangers): For heating and cooling of gases, Condensers, Flue Gas Coolers & Condensers. Very compact units compared to traditional constructions. Steam/Steam Generators, Hot Oil/Steam Generators, Clean Steam Generators Shell and Tube Heat Exchangers: Stainless steel Heat Exchangers Plate and Frame Heat Exchangers: Gasketed Heat Exchangers. Special constructions for use on Steam Systems.

HUMIDIFIERS
Humidification products: - Steam injection humidifiers - Self generative humidifiers

INSPECTION GLASS
A wide range of sight glasses, sight check valves and pressure gauges is readily available.

PACKAGE DELIVERIES
Custom-built Modules for Heat Exchange: Tank Cleaning, Product Heating, Steam/Steam and Hot Oil/Steam Generators. Pumping Modules, Heat Recovery modules etc. We take the responsibility for the function of the module, including commissioning.

PIPE ARMATURE
Pipeline ancillaries: - Bellows sealed stop valves - HV3 stop valves - Piston valves - Ball valves - Butterfly valves - Check valves - Strainers and filters - Separators and insulation jackets - Sight glasses - Diffusers - Pressure gauges and temperature.. - Air vents and air eliminators - Vacuum breakers - Hosedown stations - Depressurisation Valves

PRESSURE GAUGES
A range of pressure gauges and dial thermometers for general purpose use. Siphon tubes are available for pressure gauges where required.

PUMPS

SAFETY VALVES

Vital for the protection of people and
plant. A comprehensive range of safety valves available with screwed or flanged connections in bronze, SG iron and carbon steel body materials. Inlet sizes are 15 mm through 150 mm and feature soft seal and open and closed bonnet options.

STEAM TRAPS
Steam Traps: - Steam trap performance monitors - Balanced pressure - Bimetallic - Fixed temperature discharge - Ball float - Inverted bucket - Thermodynamic - Sealed - Swivel connectors and traps - Manifolds and insulation jackets

STOP VALVES

Bellows sealed stop valves
These bellows sealed stop valves are ideal for high pressure and high temperature applications. Range: DN15 to DN300; cast iron, SG iron, carbon steel and stainless steel; pressures up to 40 bar; flanged and socket weld connections. 

HV3 stop valves
Globe isolation valve for use on
steam, water, oil or air.

STRAINERS
Range: DN15 to DN250; bronze, cast iron, cast steel and stainless steel; pressures up to 64 bar; flanged and screwed connections. Lubricators are available in different sizes to ensure the correct operation of pneumatic power tools and cylinders. Where space is limited combined filters and regulators are used.