Marine products offered by Aeron AS


	Aeron AS

Information

Products

Contacts

Trademarks

News

Product name

AIR HANDLING UNITS

Air Handling Units
Based on our long worldwide experience in the marine and offshore market, we have developed several types of high quality Air Handling Units (AHU). We offer a flexible range of units in many sizes.  The units are available in modules that enable us to deliver solutions tailor made to all kind of marine and offshore installations. Our products come in selections of single or dual-pipe units, low or high-pressure units.

AIR TERMINALS

AERON® Marine Cabin Units and air terminals are designed for use in low and high speed marine air conditioning systems. Their task is to control the airflow and temperature. We have a comprehensive range of Cabin Units for wall mounting or ceiling suspension, units for 1-pipe, 2 pipe, 1 pipe with reheat and a wide selection of air terminal units The manually operated cabin units includes a reheater with room thermostat, or just a manual damper (manual model) which both allow the manual adjustment of airflow quantity.

The Cabin Units includes a selection of room thermostats and diffusors. We may also offer automatic pressure-independent cabin units that support the most sophisticated indoor environment in cabins. The airflow can be controlled and maintained individually in each cabin and thus sound levels and comfort are kept in a best possible level. The airflow and temperature can be continuously measured so that the controller will cut off the reheat power below the minimum airflow. Some Marine cabin units can operate on a LON or Ethernet network with a dedicated network adapter. Through intelligent network and pressure-independent operation systems it is possible to reach the best benefits of energy efficiency technology.

ANTENNA COOLING UNITS

AERON® Antenna unit type AM is a lightweight,compact cooling unit designed for cooling of antenna systems. The AM unit is
equipped with compressor, evaporator and air-cooled condenser all fitted together in a
”ready to use” unit.

The AM can operate at surrounding temperatures
up to 65˚C. The units will be delivered with thermostat and complete control panel for easy operation.

The AM Unit is a compact, flexible and quiet running air-condition unit. The unit is designed to operate inside or below radar
domes in a non EX zone. The unit normally has a cooling capacity of 2,5 - 3.5 kW.

The unit is built in stainless steel chassis AISI 316 quality for long lasting lifetime. The construction is strong due to the harsh
environment often found in demanding marine and offshore installations.

AUTOMATION SYSTEMS

Exclusive automation systems for HVAC-R systems contribute to higher productivity in friendly working environments and energy savings. To control the HVAC-R systems we deliver everything from simple, virtually maintenance-free plants to state of the art PLC and computerized systems. All necessary control panels, starters, frequency converters systems, valves, motors, sensors and other accessories necessary for controlling and monitoring of our HVAC systems.

The AERON HVAC Automation systems are made for dedicated control of each Air Handling Units (AHU) and refrigeration machineries. The AERON HVAC Automation Systems may also include all other equipment like Cabin Units, Fan Coils, Fans, dampers, valves and sensors for control and monitor the humidity, temperatures, airflows etc. For the overall control functions of the HVAC system, the system may connect to the ships main computer system (IAS) and be delivered with backup systems according to our customers’ requirements.

AXIAL FANS

Axial Fans
Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms a.o. where you transport large air volumes at relative small pressure drops.

CABIN UNITS

AERON® Marine Cabin Units and air terminals are designed for use in low and high speed marine air conditioning systems. Their task is to control the airflow and temperature. We have a comprehensive range of Cabin Units for wall mounting or ceiling suspension, units for 1-pipe, 2 pipe, 1 pipe with reheat and a wide selection of air terminal units The manually operated cabin units includes a reheater with room thermostat, or just a manual damper (manual model) which both allow the manual adjustment of airflow quantity.

The Cabin Units includes a selection of room thermostats and diffusors. We may also offer automatic pressure-independent cabin units that support the most sophisticated indoor environment in cabins. The airflow can be controlled and maintained individually in each cabin and thus sound levels and comfort are kept in a best possible level. The airflow and temperature can be continuously measured so that the controller will cut off the reheat power below the minimum airflow. Some Marine cabin units can operate on a LON or Ethernet network with a dedicated network adapter. Through intelligent network and pressure-independent operation systems it is possible to reach the best benefits of energy efficiency technology.

CENTRIFUGAL FANS

Typical applications for these fans are
exhaust air from different rooms in accommodation areas, or as supply or exhaust fans for any room with narrow spaces that requires small ducts with high speed air
distribution.

CONTAINERS

Our AERON® container’s can be delivered both for marine and offshore applications. These can be delivered fully insulated and with necessary light, ventilation, cooling and heating. You only need to supply electricity and necessary water and ventilation ducts.

We may deliver  containers for storage of special equipment in ATEX or non ATEX, and containers with complete HVAC-R systems for accommodation or technical rooms.  The systems may be designed according to customers’ requirements and all will be delivered in accordance with relevant rules and regulations.

Typical applications:

- Storage of lithium battery packages in ATEX with necessary HVAC
- Storage of painting equipment in ATEX with necessary HVAC.
- Container with complete HVAC Systems for accommodation
- Container for cooling of Instrumentroom or Technical rooms
- Container with complete provision room cooling system
- Containers for temporary refuges with necessary equipment.
- Other tailor made solutions in ATEX or non ATEX.
 

Examples of AERON® HVAC container.

- Containers with Mist Eliminator louvers, Air Handling Units, fans etc.
- Refrigeration machinery with air-cooled or water cooled condensers.
- Cooling system with necessary heat exchangers, integrated pumps.
- Complete solutions with integrated PLC automation & control system.

CONTROL SYSTEMS

To control the system we deliver everything from simple, virtually maintenance-free plants to state of the art computerised systems. All necessary control panels, starters, frequency converter systems, valves, motors, sensors and other accessories necessary for controlling and monitoring of HVAC systems.

DAMPERS

Dampers and Fire-dampers
We deliver any types of heavy-duty dampers for marine and offshore applications, including certified fire-dampers approved by classification societies.

FANS

We are offering all types of fans needed to create an optimal ventilation system for marine and offshore applications. With requisite certificates according to class and governmental requirements.

Axial Fans
Typical applications for these fans are mechanical ventilation of technical rooms like engine rooms, cargo rooms a.o. where you transport large air volumes at relative small pressure drops.

Explosion - Proof Fans for Hazardous Area
Hazardous areas onboard offshore rigs, chemical tankers, oil tankers and gas carriers have very stringent requirements with regard to design and execution of the ventilation fans concerning safety. We offer a wide range of special fans for installation in hazardous areas.

FANS COILS

The AERON® range of Self Contained Units and Fan Coils solutions for demanding marine applications may provide individual air-conditioning in the room by automatic temperature control. The FCU and SCU units normally recirculates the air in the cabin, and some includes necessary fresh air supply.

The vertical fan coils for Cabins are designed for silent cabin comfort with sophisticated air treatment and control. An advanced digital room temperature control system with stepless fan speed control and heating/cooling power regulation completes the solution. To ensure easy installation in prefabricated cabins, FCU can be installed e.g. in the toilet block in the vertical position. In addition to better sound attenuation, this offers easy access to the unit without disturbing passengers

For larger rooms we offer a standard series of Vertical Air Handling Units VAHU or Self Contained Units (SCU) especially suited for air handling in rooms with large dimensions that might require large cooling or heating capacities.

We offer Fan Coils Units (FCU), Vertical Air Handling Units (VAHU) and Self Contained Units (SCU) for the following marine applications:

- FCU for Cabins, vertical or horizontal types
- FCU for Public areas
- FCU, VAHU and SCU for technical rooms
- FCU, VAHU and SCU for public rooms and technical-/ data rooms
- Other special made FCU, VAHU and SCU units available upon request.

HVAC

Exclusive automation systems for HVAC-R systems contribute to higher productivity in friendly working environments and energy savings. To control the HVAC-R systems we deliver everything from simple, virtually maintenance-free plants to state of the art PLC and computerized systems. All necessary control panels, starters, frequency converters systems, valves, motors, sensors and other accessories necessary for controlling and monitoring of our HVAC systems.

The AERON HVAC Automation systems are made for dedicated control of each Air Handling Units (AHU) and refrigeration machineries. The AERON HVAC Automation Systems may also include all other equipment like Cabin Units, Fan Coils, Fans, dampers, valves and sensors for control and monitor the humidity, temperatures, airflows etc. For the overall control functions of the HVAC system, the system may connect to the ships main computer system (IAS) and be delivered with backup systems according to our customers’ requirements.

REFRIGERATION PLANTS

The range of AERON® refrigerating products will cover every need for refrigeration onboard modern ships and offshore installations. All refrigeration machineries and cooling products are supplied according to requirements from yards, owners, classification society, and national authorities.

Our refrigeration machineries are constructed for marine and offshore applications. Components and materials are based on our customers’ requirements and our long experience in the business. Emphasis is put on safety, energy efficiency, small dimensions, low weight and easy maintenance as well as site installation-friendly solutions.

The refrigeration plants can be delivered either as direct expansion systems or as chilled water plants for indirect cooling. Our plants can be delivered with air-cooled or water cooled condensers, compressors for reciprocating or screw type systems, or as multi compressor units fitted with several compressors. Whatever the requirements, we will provide an optimal designed plant that meet your demands.

Our refrigeration products can be delivered, but not limited to the following applications:

- Air cooled or water-cooled - Chilled water refrigeration units – CW.
- Air cooled or water-cooled
Refrigeration units with direct expansion – DX.
- Air cooled or water-cooled Split AC units for ATEX or non-ATEX.
- Fan coils for Chilled water or air-cooled refrigeration units.
- Complete Provision room refrigeration plant
- Self Contained Units for return air or fresh air supply.
- Compact Deck units with Air Handling Units and refrigeration units built together
- Taylor made cooling systems in ATEX or non-ATEX.
- Antenna cooling units

SEPARATORS

Humidity does more damage than most people realize. Humidity leads to corrosion, which will shorten the lifespan of machinery, metal structures, electrical installations and electronic systems. Installation onboard offshore platforms and various types of ships are often exposed to extreme environmental conditions. Louvers in general, particular the intake louvers are often exposed to larger amounts of water from heavy rain, strong winds, green sea and water spray. To ensure the longevity of the louvers, but also to increase the lifespan and performance of machinery, electronic systems and more, a well-dimensioned and high efficient intake louver systems is always well invested money.

AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminum alloy or in stainless steel. The droplet separators can be combined with a filter coalesces system for water and dust separation.

All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goosenecks.

SILENCERS

SPIRO PIPES

Our AERON® spiro pipe systems comes in uninsulated and preinsulated types, that complies
with EUROVENT 2.2 Class C specifications for tightness and withstands negative and positive
pressure up to 3000 Pa.
The preinsulated spiro pipes is made of galvanized steel sheet and insulated with 16mm
mineral wool that provides an excellent guarantee against heat loss during the winter, and
against condensation in the period of cooling all through the summer. The fittings and pipes are ready for easy assembling as the fittings are supplied with a sealed rubber-ring to ensure tightness.
The uninsulated and preinsulated spiropipes can also be delivered in stainless steel, suitable
for outdoor installation in offshore environments.

WEATHER LOUVERS

Humidity does more damage than most people realize. Humidity leads to corrosion, which will shorten the lifespan of machinery, metal structures, electrical installations and electronic systems. Installation onboard offshore platforms and various types of ships are often exposed to extreme environmental conditions. Louvers in general, particular the intake louvers are often exposed to larger amounts of water from heavy rain, strong winds, green sea and water spray. To ensure the longevity of the louvers, but also to increase the lifespan and performance of machinery, electronic systems and more, a well-dimensioned and high efficient intake louver systems is always well invested money.

AERON® droplet separators are heavy duty, high efficient water and moisture eliminators that yield high efficiency with low operating pressure drop. The separators are available in sea water resistant aluminum alloy or in stainless steel. The droplet separators can be combined with a filter coalesces system for water and dust separation.

All our louvers and droplet separators that can be delivered in combination with a damper or hatch for weather-tight closing. In addition to the advanced moisture eliminators, we also supply all kind of simple louvers, hoods and goosenecks.